source: branches/minix3-book/servers/pm/table.c@ 26

Last change on this file since 26 was 4, checked in by Mattia Monga, 14 years ago

Importazione sorgenti libro

File size: 3.1 KB
Line 
1/* This file contains the table used to map system call numbers onto the
2 * routines that perform them.
3 */
4
5#define _TABLE
6
7#include "pm.h"
8#include <minix/callnr.h>
9#include <signal.h>
10#include "mproc.h"
11#include "param.h"
12
13/* Miscellaneous */
14char core_name[] = "core"; /* file name where core images are produced */
15
16_PROTOTYPE (int (*call_vec[NCALLS]), (void) ) = {
17 no_sys, /* 0 = unused */
18 do_pm_exit, /* 1 = exit */
19 do_fork, /* 2 = fork */
20 no_sys, /* 3 = read */
21 no_sys, /* 4 = write */
22 no_sys, /* 5 = open */
23 no_sys, /* 6 = close */
24 do_waitpid, /* 7 = wait */
25 no_sys, /* 8 = creat */
26 no_sys, /* 9 = link */
27 no_sys, /* 10 = unlink */
28 do_waitpid, /* 11 = waitpid */
29 no_sys, /* 12 = chdir */
30 do_time, /* 13 = time */
31 no_sys, /* 14 = mknod */
32 no_sys, /* 15 = chmod */
33 no_sys, /* 16 = chown */
34 do_brk, /* 17 = break */
35 no_sys, /* 18 = stat */
36 no_sys, /* 19 = lseek */
37 do_getset, /* 20 = getpid */
38 no_sys, /* 21 = mount */
39 no_sys, /* 22 = umount */
40 do_getset, /* 23 = setuid */
41 do_getset, /* 24 = getuid */
42 do_stime, /* 25 = stime */
43 do_trace, /* 26 = ptrace */
44 do_alarm, /* 27 = alarm */
45 no_sys, /* 28 = fstat */
46 do_pause, /* 29 = pause */
47 no_sys, /* 30 = utime */
48 no_sys, /* 31 = (stty) */
49 no_sys, /* 32 = (gtty) */
50 no_sys, /* 33 = access */
51 no_sys, /* 34 = (nice) */
52 no_sys, /* 35 = (ftime) */
53 no_sys, /* 36 = sync */
54 do_kill, /* 37 = kill */
55 no_sys, /* 38 = rename */
56 no_sys, /* 39 = mkdir */
57 no_sys, /* 40 = rmdir */
58 no_sys, /* 41 = dup */
59 no_sys, /* 42 = pipe */
60 do_times, /* 43 = times */
61 no_sys, /* 44 = (prof) */
62 no_sys, /* 45 = unused */
63 do_getset, /* 46 = setgid */
64 do_getset, /* 47 = getgid */
65 no_sys, /* 48 = (signal)*/
66 no_sys, /* 49 = unused */
67 no_sys, /* 50 = unused */
68 no_sys, /* 51 = (acct) */
69 no_sys, /* 52 = (phys) */
70 no_sys, /* 53 = (lock) */
71 no_sys, /* 54 = ioctl */
72 no_sys, /* 55 = fcntl */
73 no_sys, /* 56 = (mpx) */
74 no_sys, /* 57 = unused */
75 no_sys, /* 58 = unused */
76 do_exec, /* 59 = execve */
77 no_sys, /* 60 = umask */
78 no_sys, /* 61 = chroot */
79 do_getset, /* 62 = setsid */
80 do_getset, /* 63 = getpgrp */
81
82 no_sys, /* 64 = unused */
83 no_sys, /* 65 = UNPAUSE */
84 no_sys, /* 66 = unused */
85 no_sys, /* 67 = REVIVE */
86 no_sys, /* 68 = TASK_REPLY */
87 no_sys, /* 69 = unused */
88 no_sys, /* 70 = unused */
89 do_sigaction, /* 71 = sigaction */
90 do_sigsuspend, /* 72 = sigsuspend */
91 do_sigpending, /* 73 = sigpending */
92 do_sigprocmask, /* 74 = sigprocmask */
93 do_sigreturn, /* 75 = sigreturn */
94 do_reboot, /* 76 = reboot */
95 do_svrctl, /* 77 = svrctl */
96
97 no_sys, /* 78 = unused */
98 do_getsysinfo, /* 79 = getsysinfo */
99 do_getprocnr, /* 80 = getprocnr */
100 no_sys, /* 81 = unused */
101 no_sys, /* 82 = fstatfs */
102 do_allocmem, /* 83 = memalloc */
103 do_freemem, /* 84 = memfree */
104 no_sys, /* 85 = select */
105 no_sys, /* 86 = fchdir */
106 no_sys, /* 87 = fsync */
107 do_getsetpriority, /* 88 = getpriority */
108 do_getsetpriority, /* 89 = setpriority */
109 do_time, /* 90 = gettimeofday */
110};
111/* This should not fail with "array size is negative": */
112extern int dummy[sizeof(call_vec) == NCALLS * sizeof(call_vec[0]) ? 1 : -1];
Note: See TracBrowser for help on using the repository browser.