source: trunk/minix/commands/elvis/curses.c@ 20

Last change on this file since 20 was 9, checked in by Mattia Monga, 14 years ago

Minix 3.1.2a

File size: 19.0 KB
Line 
1/* curses.c */
2
3/* Author:
4 * Steve Kirkendall
5 * 14407 SW Teal Blvd. #C
6 * Beaverton, OR 97005
7 * kirkenda@cs.pdx.edu
8 */
9
10
11/* This file contains the functions & variables needed for a tiny subset of
12 * curses. The principle advantage of this version of curses is its
13 * extreme speed. Disadvantages are potentially larger code, few supported
14 * functions, limited compatibility with full curses, and only stdscr.
15 */
16
17#include "config.h"
18#include "vi.h"
19
20#if ANY_UNIX
21/* The termios/termio/sgtty #ifdefs were a mess, so I removed all but termios.
22 * (KJB)
23 */
24# include <termios.h>
25# if MINIX
26# include <sys/ioctl.h>
27# endif
28#endif
29
30#if TOS
31# include <osbind.h>
32#endif
33
34#if OSK
35# include <sgstat.h>
36#endif
37
38#if VMS
39extern int VMS_read_raw; /* Set in initscr() */
40#endif
41
42
43extern char *getenv();
44static void starttcap();
45
46/* variables, publicly available & used in the macros */
47char *termtype; /* name of terminal entry */
48short ospeed; /* speed of the tty, eg B2400 */
49#if OSK
50char PC_; /* Pad char */
51char *BC; /* backspace character string */
52#else
53char PC; /* Pad char */
54#endif
55WINDOW *stdscr; /* pointer into kbuf[] */
56WINDOW kbuf[KBSIZ]; /* a very large output buffer */
57int LINES; /* :li#: number of rows */
58int COLS; /* :co#: number of columns */
59int AM; /* :am: boolean: auto margins? */
60int PT; /* :pt: boolean: physical tabs? */
61char *VB; /* :vb=: visible bell */
62char *UP; /* :up=: move cursor up */
63char *SO = ""; /* :so=: standout start */
64char *SE = ""; /* :se=: standout end */
65char *US = ""; /* :us=: underline start */
66char *UE = ""; /* :ue=: underline end */
67char *MD = ""; /* :md=: bold start */
68char *ME = ""; /* :me=: bold end */
69char *AS = ""; /* :as=: alternate (italic) start */
70char *AE = ""; /* :ae=: alternate (italic) end */
71#ifndef NO_VISIBLE
72char *MV; /* :mv=: "visible" selection start */
73#endif
74char *CM; /* :cm=: cursor movement */
75char *CE; /* :ce=: clear to end of line */
76char *CD; /* :cd=: clear to end of screen */
77char *AL; /* :al=: add a line */
78char *DL; /* :dl=: delete a line */
79#if OSK
80char *SR_; /* :sr=: scroll reverse */
81#else
82char *SR; /* :sr=: scroll reverse */
83#endif
84char *KS = ""; /* :ks=: init string for cursor */
85char *KE = ""; /* :ke=: restore string for cursor */
86char *KU; /* :ku=: key sequence sent by up arrow */
87char *KD; /* :kd=: key sequence sent by down arrow */
88char *KL; /* :kl=: key sequence sent by left arrow */
89char *KR; /* :kr=: key sequence sent by right arrow */
90char *HM; /* :HM=: key sequence sent by the <Home> key */
91char *EN; /* :EN=: key sequence sent by the <End> key */
92char *PU; /* :PU=: key sequence sent by the <PgUp> key */
93char *PD; /* :PD=: key sequence sent by the <PgDn> key */
94char *KI; /* :kI=: key sequence sent by the <Insert> key */
95#ifndef NO_FKEY
96char *FKEY[NFKEYS]; /* :k0=: ... :k9=: sequences sent by function keys */
97#endif
98char *IM = ""; /* :im=: insert mode start */
99char *IC = ""; /* :ic=: insert the following character */
100char *EI = ""; /* :ei=: insert mode end */
101char *DC; /* :dc=: delete a character */
102char *TI = ""; /* :ti=: terminal init */ /* GB */
103char *TE = ""; /* :te=: terminal exit */ /* GB */
104#ifndef NO_CURSORSHAPE
105#if 1
106char *CQ = (char *)0;/* :cQ=: normal cursor */
107char *CX = (char *)1;/* :cX=: cursor used for EX command/entry */
108char *CV = (char *)2;/* :cV=: cursor used for VI command mode */
109char *CI = (char *)3;/* :cI=: cursor used for VI input mode */
110char *CR = (char *)4;/* :cR=: cursor used for VI replace mode */
111#else
112char *CQ = ""; /* :cQ=: normal cursor */
113char *CX = ""; /* :cX=: cursor used for EX command/entry */
114char *CV = ""; /* :cV=: cursor used for VI command mode */
115char *CI = ""; /* :cI=: cursor used for VI input mode */
116char *CR = ""; /* :cR=: cursor used for VI replace mode */
117#endif
118#endif
119char *aend = ""; /* end an attribute -- either UE or ME */
120char ERASEKEY; /* backspace key taken from ioctl structure */
121#ifndef NO_COLOR
122char normalcolor[16];
123char SOcolor[16];
124char SEcolor[16];
125char UScolor[16];
126char UEcolor[16];
127char MDcolor[16];
128char MEcolor[16];
129char AScolor[16];
130char AEcolor[16];
131# ifndef NO_POPUP
132char POPUPcolor[16];
133# endif
134# ifndef NO_VISIBLE
135char VISIBLEcolor[16];
136# endif
137#endif
138
139#if ANY_UNIX
140static struct termios oldtermio; /* original tty mode */
141static struct termios newtermio; /* cbreak/noecho tty mode */
142#endif
143
144#if OSK
145static struct sgbuf oldsgttyb; /* orginal tty mode */
146static struct sgbuf newsgttyb; /* noecho tty mode */
147#endif
148
149static char *capbuf; /* capability string buffer */
150
151
152/* Initialize the Curses package. */
153void initscr()
154{
155 /* make sure TERM variable is set */
156 termtype = getenv("TERM");
157
158#if VMS
159 /* VMS getenv() handles TERM as a environment setting. Foreign
160 * terminal support can be implemented by setting the ELVIS_TERM
161 * logical or symbol to match a tinytcap entry.
162 */
163 if (!strcmp(termtype,"unknown"))
164 termtype = getenv("ELVIS_TERM");
165#endif
166#if MSDOS
167 /* For MS-DOS, if TERM is unset we can default to "pcbios", or
168 * maybe "rainbow".
169 */
170 if (!termtype)
171 {
172#ifdef RAINBOW
173 if (*(unsigned char far*)(0xffff000eL) == 6 /* Rainbow 100a */
174 || *(unsigned char far*)(0xffff000eL) == 148)/* Rainbow 100b */
175 {
176 termtype = "rainbow";
177 }
178 else
179#endif
180 termtype = "pcbios";
181 }
182 if (!strcmp(termtype, "pcbios"))
183#else
184 if (!termtype)
185#endif
186 {
187#if ANY_UNIX
188 write(2, "Environment variable TERM must be set\n", (unsigned)38);
189 exit(1);
190#endif
191#if OSK
192 writeln(2, "Environment variable TERM must be set\n", (unsigned)38);
193 exit(1);
194#endif
195#if AMIGA
196 termtype = TERMTYPE;
197 starttcap(termtype);
198#endif
199#if MSDOS
200 starttcap("pcbios");
201#endif
202#if TOS
203 termtype = "vt52";
204 starttcap(termtype);
205#endif
206#if VMS
207 write(2, "UNKNOWN terminal: define ELVIS_TERM\n", (unsigned)36);
208 exit(1);
209#endif
210 }
211 else
212 {
213#if MSDOS
214 *o_pcbios = 0;
215#endif
216 /* start termcap stuff */
217 starttcap(termtype);
218 }
219
220 /* create stdscr and curscr */
221 stdscr = kbuf;
222
223 /* change the terminal mode to cbreak/noecho */
224#if ANY_UNIX
225 tcgetattr(2, &oldtermio);
226#endif
227
228#if OSK
229 _gs_opt(0, &oldsgttyb);
230#endif
231
232#if VMS
233 VMS_read_raw = 1; /* cbreak/noecho */
234 vms_open_tty();
235#endif
236 resume_curses(TRUE);
237}
238
239/* Shut down the Curses package. */
240void endwin()
241{
242 /* change the terminal mode back the way it was */
243 suspend_curses();
244#if AMIGA
245 amiclosewin();
246#endif
247}
248
249
250static int curses_active = FALSE;
251
252/* Send any required termination strings. Turn off "raw" mode. */
253void suspend_curses()
254{
255#ifndef NO_CURSORSHAPE
256 if (has_CQ)
257 {
258 do_CQ();
259 }
260#endif
261 if (has_TE) /* GB */
262 {
263 do_TE();
264 }
265 if (has_KE)
266 {
267 do_KE();
268 }
269#ifndef NO_COLOR
270 quitcolor();
271#endif
272 refresh();
273
274 /* change the terminal mode back the way it was */
275#if ANY_UNIX
276 tcsetattr(2, TCSADRAIN, &oldtermio);
277#endif
278#if OSK
279 _ss_opt(0, &oldsgttyb);
280#endif
281#if AMIGA
282 ttyshutdown();
283#endif
284#if MSDOS
285 raw_set_stdio(FALSE);
286#endif
287
288#if VMS
289 VMS_read_raw = 0;
290#endif
291 curses_active = FALSE;
292}
293
294
295/* put the terminal in RAW mode. If "quietly" is FALSE, then ask the user
296 * to hit a key, and wait for keystroke before returning.
297 */
298void resume_curses(quietly)
299 int quietly;
300{
301 if (!curses_active)
302 {
303 /* change the terminal mode to cbreak/noecho */
304#if ANY_UNIX
305 ospeed = cfgetospeed(&oldtermio);
306 ERASEKEY = oldtermio.c_cc[VERASE];
307 newtermio = oldtermio;
308 newtermio.c_iflag &= (IXON|IXOFF|IXANY|ISTRIP|IGNBRK);
309 newtermio.c_oflag &= ~OPOST;
310 newtermio.c_lflag &= ISIG;
311 newtermio.c_cc[VINTR] = ctrl('C'); /* always use ^C for interrupts */
312 newtermio.c_cc[VMIN] = 1;
313 newtermio.c_cc[VTIME] = 0;
314 newtermio.c_cc[VSUSP] = 0;
315 tcsetattr(2, TCSADRAIN, &newtermio);
316#endif
317#if OSK
318 newsgttyb = oldsgttyb;
319 newsgttyb.sg_echo = 0;
320 newsgttyb.sg_eofch = 0;
321 newsgttyb.sg_kbach = 0;
322 newsgttyb.sg_kbich = ctrl('C');
323 _ss_opt(0, &newsgttyb);
324 ospeed = oldsgttyb.sg_baud;
325 ERASEKEY = oldsgttyb.sg_bspch;
326#endif
327#if AMIGA
328 /* turn on window resize and RAW */
329 ttysetup();
330#endif
331#if MSDOS
332 raw_set_stdio(TRUE);
333#endif
334
335#if VMS
336 VMS_read_raw = 1;
337 { int c;
338 read(0,&c,0); /* Flush the tty buffer. */
339 }
340 ERASEKEY = '\177'; /* Accept <DEL> as <^H> for VMS */
341#endif
342
343 if (has_TI) /* GB */
344 {
345 do_TI();
346 }
347 if (has_KS)
348 {
349 do_KS();
350 }
351
352 curses_active = TRUE;
353 }
354
355 /* If we're supposed to quit quietly, then we're done */
356 if (quietly)
357 {
358 return;
359 }
360
361 signal(SIGINT, SIG_IGN);
362
363 move(LINES - 1, 0);
364 do_SO();
365#if VMS
366 qaddstr("\n[Press <RETURN> to continue]");
367#else
368 qaddstr("[Press <RETURN> to continue]");
369#endif
370 do_SE();
371 refresh();
372 ttyread(kbuf, 20, 0); /* in RAW mode, so <20 is very likely */
373 if (kbuf[0] == ':')
374 {
375 mode = MODE_COLON;
376 addch('\n');
377 refresh();
378 }
379 else
380 {
381 mode = MODE_VI;
382 redraw(MARK_UNSET, FALSE);
383 }
384 exwrote = FALSE;
385
386#if TURBOC || __GNUC__ || _ANSI
387 signal(SIGINT, (void(*)()) trapint);
388#else
389 signal(SIGINT, trapint);
390#endif
391}
392
393/* This function fetches an optional string from termcap */
394static void mayhave(T, s)
395 char **T; /* where to store the returned pointer */
396 char *s; /* name of the capability */
397{
398 char *val;
399
400 val = tgetstr(s, &capbuf);
401 if (val)
402 {
403 *T = val;
404 }
405}
406
407
408/* This function fetches a required string from termcap */
409static void musthave(T, s)
410 char **T; /* where to store the returned pointer */
411 char *s; /* name of the capability */
412{
413 mayhave(T, s);
414 if (!*T)
415 {
416 write(2, "This termcap entry lacks the :", (unsigned)30);
417 write(2, s, (unsigned)2);
418 write(2, "=: capability\n", (unsigned)14);
419#if OSK
420 write(2, "\l", 1);
421#endif
422 exit(1);
423 }
424}
425
426
427/* This function fetches a pair of strings from termcap. If one of them is
428 * missing, then the other one is ignored.
429 */
430static void pair(T, U, sT, sU)
431 char **T; /* where to store the first pointer */
432 char **U; /* where to store the second pointer */
433 char *sT; /* name of the first capability */
434 char *sU; /* name of the second capability */
435{
436 mayhave(T, sT);
437 mayhave(U, sU);
438 if (!**T || !**U)
439 {
440 *T = *U = "";
441 }
442}
443
444
445
446/* Read everything from termcap */
447static void starttcap(term)
448 char *term;
449{
450 static char cbmem[800];
451
452 /* allocate memory for capbuf */
453 capbuf = cbmem;
454
455 /* get the termcap entry */
456 switch (tgetent(kbuf, term))
457 {
458 case -1:
459 write(2, "Can't read /etc/termcap\n", (unsigned)24);
460#if OSK
461 write(2, "\l", 1);
462#endif
463 exit(2);
464
465 case 0:
466 write(2, "Unrecognized TERM type\n", (unsigned)23);
467#if OSK
468 write(2, "\l", 1);
469#endif
470 exit(3);
471 }
472
473 /* get strings */
474 musthave(&UP, "up");
475 mayhave(&VB, "vb");
476 musthave(&CM, "cm");
477 pair(&SO, &SE, "so", "se");
478 mayhave(&TI, "ti");
479 mayhave(&TE, "te");
480 if (tgetnum("ug") <= 0)
481 {
482 pair(&US, &UE, "us", "ue");
483 pair(&MD, &ME, "md", "me");
484
485 /* get italics, or have it default to underline */
486 pair(&AS, &AE, "as", "ae");
487 if (!*AS)
488 {
489 AS = US;
490 AE = UE;
491 }
492 }
493#ifndef NO_VISIBLE
494 MV = SO; /* by default */
495 mayhave(&MV, "mv");
496#endif
497 mayhave(&AL, "al");
498 mayhave(&DL, "dl");
499 musthave(&CE, "ce");
500 mayhave(&CD, "cd");
501#if OSK
502 mayhave(&SR_, "sr");
503#else
504 mayhave(&SR, "sr");
505#endif
506 pair(&IM, &EI, "im", "ei");
507 mayhave(&IC, "ic");
508 mayhave(&DC, "dc");
509
510 /* other termcap stuff */
511 AM = (tgetflag("am") && !tgetflag("xn"));
512 PT = tgetflag("pt");
513#if AMIGA
514 amiopenwin(termtype); /* Must run this before ttysetup(); */
515 ttysetup(); /* Must run this before getsize(0); */
516#endif
517 getsize(0);
518
519 /* Key sequences */
520 pair(&KS, &KE, "ks", "ke");
521 mayhave(&KU, "ku"); /* up */
522 mayhave(&KD, "kd"); /* down */
523 mayhave(&KL, "kl"); /* left */
524 mayhave(&KR, "kr"); /* right */
525 mayhave(&PU, "kP"); /* PgUp */
526 mayhave(&PD, "kN"); /* PgDn */
527 mayhave(&HM, "kh"); /* Home */
528 mayhave(&EN, "kH"); /* End */
529 mayhave(&KI, "kI"); /* Insert */
530#ifndef CRUNCH
531 if (!PU) mayhave(&PU, "K2"); /* "3x3 pad" names for PgUp, etc. */
532 if (!PD) mayhave(&PD, "K5");
533 if (!HM) mayhave(&HM, "K1");
534 if (!EN) mayhave(&EN, "K4");
535
536 mayhave(&PU, "PU"); /* old XENIX names for PgUp, etc. */
537 mayhave(&PD, "PD"); /* (overrides others, if used.) */
538 mayhave(&HM, "HM");
539 mayhave(&EN, "EN");
540#endif
541#ifndef NO_FKEY
542 mayhave(&FKEY[0], "k0"); /* function key codes */
543 mayhave(&FKEY[1], "k1");
544 mayhave(&FKEY[2], "k2");
545 mayhave(&FKEY[3], "k3");
546 mayhave(&FKEY[4], "k4");
547 mayhave(&FKEY[5], "k5");
548 mayhave(&FKEY[6], "k6");
549 mayhave(&FKEY[7], "k7");
550 mayhave(&FKEY[8], "k8");
551 mayhave(&FKEY[9], "k9");
552# ifndef NO_SHIFT_FKEY
553 mayhave(&FKEY[10], "s0"); /* shift function key codes */
554 mayhave(&FKEY[11], "s1");
555 mayhave(&FKEY[12], "s2");
556 mayhave(&FKEY[13], "s3");
557 mayhave(&FKEY[14], "s4");
558 mayhave(&FKEY[15], "s5");
559 mayhave(&FKEY[16], "s6");
560 mayhave(&FKEY[17], "s7");
561 mayhave(&FKEY[18], "s8");
562 mayhave(&FKEY[19], "s9");
563# ifndef NO_CTRL_FKEY
564 mayhave(&FKEY[20], "c0"); /* control function key codes */
565 mayhave(&FKEY[21], "c1");
566 mayhave(&FKEY[22], "c2");
567 mayhave(&FKEY[23], "c3");
568 mayhave(&FKEY[24], "c4");
569 mayhave(&FKEY[25], "c5");
570 mayhave(&FKEY[26], "c6");
571 mayhave(&FKEY[27], "c7");
572 mayhave(&FKEY[28], "c8");
573 mayhave(&FKEY[29], "c9");
574# ifndef NO_ALT_FKEY
575 mayhave(&FKEY[30], "a0"); /* alt function key codes */
576 mayhave(&FKEY[31], "a1");
577 mayhave(&FKEY[32], "a2");
578 mayhave(&FKEY[33], "a3");
579 mayhave(&FKEY[34], "a4");
580 mayhave(&FKEY[35], "a5");
581 mayhave(&FKEY[36], "a6");
582 mayhave(&FKEY[37], "a7");
583 mayhave(&FKEY[38], "a8");
584 mayhave(&FKEY[39], "a9");
585# endif
586# endif
587# endif
588#endif
589
590#ifndef NO_CURSORSHAPE
591 /* cursor shapes */
592 CQ = tgetstr("cQ", &capbuf);
593 if (has_CQ)
594 {
595 CX = tgetstr("cX", &capbuf);
596 if (!CX) CX = CQ;
597 CV = tgetstr("cV", &capbuf);
598 if (!CV) CV = CQ;
599 CI = tgetstr("cI", &capbuf);
600 if (!CI) CI = CQ;
601 CR = tgetstr("cR", &capbuf);
602 if (!CR) CR = CQ;
603 }
604# ifndef CRUNCH
605 else
606 {
607 CQ = CV = "";
608 pair(&CQ, &CV, "ve", "vs");
609 CX = CI = CR = CQ;
610 }
611# endif /* !CRUNCH */
612#endif /* !NO_CURSORSHAPE */
613
614#ifndef NO_COLOR
615 strcpy(SOcolor, SO);
616 strcpy(SEcolor, SE);
617 strcpy(AScolor, AS);
618 strcpy(AEcolor, AE);
619 strcpy(MDcolor, MD);
620 strcpy(MEcolor, ME);
621 strcpy(UScolor, US);
622 strcpy(UEcolor, UE);
623# ifndef NO_POPUP
624 strcpy(POPUPcolor, SO);
625# endif
626# ifndef NO_VISIBLE
627 strcpy(VISIBLEcolor, MV);
628# endif
629#endif
630
631}
632
633
634/* This function gets the window size. It uses the TIOCGWINSZ ioctl call if
635 * your system has it, or tgetnum("li") and tgetnum("co") if it doesn't.
636 * This function is called once during initialization, and thereafter it is
637 * called whenever the SIGWINCH signal is sent to this process.
638 */
639int getsize(signo)
640 int signo;
641{
642 int lines;
643 int cols;
644#ifdef TIOCGWINSZ
645 struct winsize size;
646#endif
647
648#ifdef SIGWINCH
649 /* reset the signal vector */
650 signal(SIGWINCH, getsize);
651#endif
652
653 /* get the window size, one way or another. */
654 lines = cols = 0;
655#ifdef TIOCGWINSZ
656 if (ioctl(2, TIOCGWINSZ, &size) >= 0)
657 {
658 lines = size.ws_row;
659 cols = size.ws_col;
660 }
661#endif
662#if AMIGA
663 /* Amiga gets window size by asking the console.device */
664 if (!strcmp(TERMTYPE, termtype))
665 {
666 auto long len;
667 auto char buf[30];
668
669 Write(Output(), "\2330 q", 4); /* Ask the console.device */
670 len = Read(Input(), buf, 29);
671 buf[len] = '\000';
672 sscanf(&buf[5], "%d;%d", &lines, &cols);
673 }
674#endif
675 if ((lines == 0 || cols == 0) && signo == 0)
676 {
677 LINES = tgetnum("li");
678 COLS = tgetnum("co");
679 }
680#if MSDOS
681# ifdef RAINBOW
682 if (!strcmp(termtype, "rainbow"))
683 {
684 /* Determine whether Rainbow is in 80-column or 132-column mode */
685 cols = *(unsigned char far *)0xee000f57L;
686 }
687 else
688# endif
689 {
690 lines = v_rows();
691 cols = v_cols();
692 }
693#endif
694 if (lines >= 2)
695 {
696 LINES = lines;
697 }
698
699 if (cols >= 30)
700 {
701 COLS = cols;
702 }
703
704 /* Make sure we got values that we can live with */
705 if (LINES < 2 || COLS < 30)
706 {
707 write(2, "Screen too small\n", (unsigned)17);
708#if OSK
709 write(2, "\l", 1);
710#endif
711 endwin();
712 exit(2);
713 }
714
715#if AMIGA
716 if (*o_lines != LINES || *o_columns != COLS)
717 {
718 *o_lines = LINES;
719 *o_columns = COLS;
720 }
721#endif
722
723 return 0;
724}
725
726
727/* This is a function version of addch() -- it is used by tputs() */
728int faddch(ch)
729 int ch;
730{
731 addch(ch);
732
733 return 0;
734}
735
736/* This function quickly adds a string to the output queue. It does *NOT*
737 * convert \n into <CR><LF>.
738 */
739void qaddstr(str)
740 char *str;
741{
742 REG char *s_, *d_;
743
744#if MSDOS
745 if (o_pcbios[0])
746 {
747 while (*str)
748 qaddch(*str++);
749 return;
750 }
751#endif
752 for (s_=(str), d_=stdscr; *d_++ = *s_++; )
753 {
754 }
755 stdscr = d_ - 1;
756}
757
758/* Output the ESC sequence needed to go into any video mode, if supported */
759void attrset(a)
760 int a;
761{
762 do_aend();
763 if (a == A_BOLD)
764 {
765 do_MD();
766 aend = ME;
767 }
768 else if (a == A_UNDERLINE)
769 {
770 do_US();
771 aend = UE;
772 }
773 else if (a == A_ALTCHARSET)
774 {
775 do_AS();
776 aend = AE;
777 }
778 else
779 {
780 aend = "";
781 }
782}
783
784
785/* Insert a single character into the display */
786void insch(ch)
787 int ch;
788{
789 if (has_IM)
790 do_IM();
791 do_IC();
792 qaddch(ch);
793 if (has_EI)
794 do_EI();
795}
796
797void wrefresh()
798{
799 if (stdscr != kbuf)
800 {
801 VOIDBIOS(;,ttywrite(kbuf, (unsigned)(stdscr - kbuf)));
802 stdscr = kbuf;
803 }
804}
805
806void wqrefresh()
807{
808 if (stdscr - kbuf > 2000)
809 {
810 VOIDBIOS(stdscr = kbuf,
811 {
812 ttywrite(kbuf, (unsigned)(stdscr - kbuf));
813 stdscr = kbuf;
814 });
815 }
816}
817
818#ifndef NO_COLOR
819/* This function is called during termination. It resets color modes */
820int ansiquit()
821{
822 /* if ANSI color terminal, then reset the colors */
823 if (!strcmp(UP, "\033[A"))
824 {
825 tputs("\033[37;40m\033[m", 1, faddch);
826 clrtoeol();
827 return 1;
828 }
829 return 0;
830}
831
832/* This sets the color strings that work for ANSI terminals. If the TERMCAP
833 * doesn't look like an ANSI terminal, then it returns FALSE. If the colors
834 * aren't understood, it also returns FALSE. If all goes well, it returns TRUE
835 */
836int ansicolor(cmode, attrbyte)
837 int cmode; /* mode to set, e.g. A_NORMAL */
838 int attrbyte; /* IBM PC attribute byte */
839{
840 char temp[16]; /* hold the new mode string */
841
842 /* if not ANSI-ish, then fail */
843 if (strcmp(UP, "\033[A") && strcmp(UP, "\033OA"))
844 {
845 msg("Don't know how to set colors for this terminal");
846 return 0;
847 }
848
849 /* construct the color string */
850 sprintf(temp, "\033[m\033[3%c;4%c%s%sm",
851 "04261537"[attrbyte & 0x07],
852 "04261537"[(attrbyte >> 4) & 0x07],
853 (attrbyte & 0x08) ? ";1" : "",
854 (attrbyte & 0x80) ? ";5" : "");
855
856 /* stick it in the right place */
857 switch (cmode)
858 {
859 case A_NORMAL:
860 if (!strcmp(MEcolor, normalcolor))
861 strcpy(MEcolor, temp);
862 if (!strcmp(UEcolor, normalcolor))
863 strcpy(UEcolor, temp);
864 if (!strcmp(AEcolor, normalcolor))
865 strcpy(AEcolor, temp);
866 if (!strcmp(SEcolor, normalcolor))
867 strcpy(SEcolor, temp);
868
869 strcpy(normalcolor, temp);
870 tputs(normalcolor, 1, faddch);
871 break;
872
873 case A_BOLD:
874 strcpy(MDcolor, temp);
875 strcpy(MEcolor, normalcolor);
876 break;
877
878 case A_UNDERLINE:
879 strcpy(UScolor, temp);
880 strcpy(UEcolor, normalcolor);
881 break;
882
883 case A_ALTCHARSET:
884 strcpy(AScolor, temp);
885 strcpy(AEcolor, normalcolor);
886 break;
887
888 case A_STANDOUT:
889 strcpy(SOcolor, temp);
890 strcpy(SEcolor, normalcolor);
891 break;
892
893#ifndef NO_POPUP
894 case A_POPUP:
895 strcpy(POPUPcolor, temp);
896 break;
897#endif
898
899#ifndef NO_VISIBLE
900 case A_VISIBLE:
901 strcpy(VISIBLEcolor, temp);
902 break;
903#endif
904 }
905
906 return 1;
907}
908
909
910/* This function outputs the ESC sequence needed to switch the screen back
911 * to "normal" mode. On color terminals which haven't had their color set
912 * yet, this is one of the termcap strings; for color terminals that really
913 * have had colors defined, we just the "normal color" escape sequence.
914 */
915endcolor()
916{
917 if (aend == ME)
918 tputs(MEcolor, 1, faddch);
919 else if (aend == UE)
920 tputs(UEcolor, 1, faddch);
921 else if (aend == AE)
922 tputs(AEcolor, 1, faddch);
923 else if (aend == SE)
924 tputs(SEcolor, 1, faddch);
925 aend = "";
926 return 0;
927}
928
929
930#endif /* !NO_COLOR */
Note: See TracBrowser for help on using the repository browser.