/* vcmd.c */ /* Author: * Steve Kirkendall * 14407 SW Teal Blvd. #C * Beaverton, OR 97005 * kirkenda@cs.pdx.edu */ /* This file contains the functions that handle VI commands */ #include "config.h" #include "ctype.h" #include "vi.h" #if MSDOS # include # include #endif #if TOS # include # include #endif #if OSK # include #endif /* This function puts the editor in EX mode */ MARK v_quit() { move(LINES - 1, 0); mode = MODE_EX; return cursor; } /* This function causes the screen to be redrawn */ MARK v_redraw() { redraw(MARK_UNSET, FALSE); return cursor; } /* This function executes a string of EX commands, and waits for a user keystroke * before returning to the VI screen. If that keystroke is another ':', then * another EX command is read and executed. */ /*ARGSUSED*/ MARK v_1ex(m, text) MARK m; /* the current line */ char *text; /* the first command to execute */ { /* run the command. be careful about modes & output */ exwrote = (mode == MODE_COLON); doexcmd(text); exrefresh(); /* if mode is no longer MODE_VI, then we should quit right away! */ if (mode != MODE_VI && mode != MODE_COLON) return cursor; /* The command did some output. Wait for a keystoke. */ if (exwrote) { mode = MODE_VI; msg("[Hit to continue]"); if (getkey(0) == ':') { mode = MODE_COLON; addch('\n'); } else redraw(MARK_UNSET, FALSE); } return cursor; } /* This function undoes the last change */ /*ARGSUSED*/ MARK v_undo(m) MARK m; /* (ignored) */ { if (undo()) { redraw(MARK_UNSET, FALSE); } return cursor; } /* This function deletes the character(s) that the cursor is on */ MARK v_xchar(m, cnt, cmd) MARK m; /* where to start deletions */ long cnt; /* number of chars to delete */ int cmd; /* either 'x' or 'X' */ { DEFAULT(1); /* for 'X', adjust so chars are deleted *BEFORE* cursor */ if (cmd == 'X') { if (markidx(m) < cnt) return MARK_UNSET; m -= cnt; } /* make sure we don't try to delete more thars than there are */ pfetch(markline(m)); if (markidx(m + cnt) > plen) { cnt = plen - markidx(m); } if (cnt == 0L) { return MARK_UNSET; } /* do it */ ChangeText { cut(m, m + cnt); delete(m, m + cnt); } return m; } /* This function defines a mark */ /*ARGSUSED*/ MARK v_mark(m, count, key) MARK m; /* where the mark will be */ long count; /* (ignored) */ int key; /* the ASCII label of the mark */ { if (key < 'a' || key > 'z') { msg("Marks must be from a to z"); } else { mark[key - 'a'] = m; } return m; } /* This function toggles upper & lower case letters */ MARK v_ulcase(m, cnt) MARK m; /* where to make the change */ long cnt; /* number of chars to flip */ { REG char *pos; REG int j; DEFAULT(1); /* fetch the current version of the line */ pfetch(markline(m)); /* for each position in the line */ for (j = 0, pos = &ptext[markidx(m)]; j < cnt && *pos; j++, pos++) { if (isupper(*pos)) { tmpblk.c[j] = tolower(*pos); } else { tmpblk.c[j] = toupper(*pos); } } /* if the new text is different from the old, then change it */ if (strncmp(tmpblk.c, &ptext[markidx(m)], j)) { ChangeText { tmpblk.c[j] = '\0'; change(m, m + j, tmpblk.c); } } return m + j; } MARK v_replace(m, cnt, key) MARK m; /* first char to be replaced */ long cnt; /* number of chars to replace */ int key; /* what to replace them with */ { REG char *text; REG int i; DEFAULT(1); /* map ^M to '\n' */ if (key == '\r') { key = '\n'; } /* make sure the resulting line isn't too long */ if (cnt > BLKSIZE - 2 - markidx(m)) { cnt = BLKSIZE - 2 - markidx(m); } /* build a string of the desired character with the desired length */ for (text = tmpblk.c, i = cnt; i > 0; i--) { *text++ = key; } *text = '\0'; /* make sure cnt doesn't extend past EOL */ pfetch(markline(m)); key = markidx(m); if (key + cnt > plen) { cnt = plen - key; } /* do the replacement */ ChangeText { change(m, m + cnt, tmpblk.c); } if (*tmpblk.c == '\n') { return (m & ~(BLKSIZE - 1)) + cnt * BLKSIZE; } else { return m + cnt - 1; } } MARK v_overtype(m) MARK m; /* where to start overtyping */ { MARK end; /* end of a substitution */ static long width; /* width of a single-line replace */ /* the "doingdot" version of replace is really a substitution */ if (doingdot) { /* was the last one really repeatable? */ if (width < 0) { msg("Can't repeat a multi-line overtype command"); return MARK_UNSET; } /* replacing nothing by nothing? Don't bother */ if (width == 0) { return m; } /* replace some chars by repeated text */ return v_subst(m, width); } /* Normally, we input starting here, in replace mode */ ChangeText { end = input(m, m, WHEN_VIREP, FALSE); } /* if we ended on the same line we started on, then this * overtype is repeatable via the dot key. */ if (markline(end) == markline(m) && end >= m - 1L) { width = end - m + 1L; } else /* it isn't repeatable */ { width = -1L; } return end; } /* This function selects which cut buffer to use */ /*ARGSUSED*/ MARK v_selcut(m, cnt, key) MARK m; long cnt; int key; { cutname(key); return m; } /* This function pastes text from a cut buffer */ /*ARGSUSED*/ MARK v_paste(m, cnt, cmd) MARK m; /* where to paste the text */ long cnt; /* (ignored) */ int cmd; /* either 'p' or 'P' */ { MARK dest; ChangeText { /* paste the text, and find out where it ends */ dest = paste(m, cmd == 'p', TRUE); /* was that a line-mode paste? */ if (dest && markline(dest) != markline(m)) { /* line-mode pastes leave the cursor at the front * of the first pasted line. */ dest = m; if (cmd == 'p') { dest += BLKSIZE; } force_flags |= FRNT; } } return dest; } /* This function yanks text into a cut buffer */ MARK v_yank(m, n) MARK m, n; /* range of text to yank */ { cut(m, n); return m; } /* This function deletes a range of text */ MARK v_delete(m, n) MARK m, n; /* range of text to delete */ { /* illegal to try and delete nothing */ if (n <= m) { return MARK_UNSET; } /* Do it */ ChangeText { cut(m, n); delete(m, n); } return m; } /* This starts input mode without deleting anything */ MARK v_insert(m, cnt, key) MARK m; /* where to start (sort of) */ long cnt; /* repeat how many times? */ int key; /* what command is this for? {a,A,i,I,o,O} */ { int wasdot; long reps; int above; /* boolean: new line going above old line? */ DEFAULT(1); ChangeText { /* tweak the insertion point, based on command key */ above = FALSE; switch (key) { case 'i': break; case 'a': pfetch(markline(m)); if (plen > 0) { m++; } break; case 'I': m = m_front(m, 1L); break; case 'A': pfetch(markline(m)); m = (m & ~(BLKSIZE - 1)) + plen; break; case 'O': m &= ~(BLKSIZE - 1); add(m, "\n"); above = TRUE; break; case 'o': m = (m & ~(BLKSIZE - 1)) + BLKSIZE; add(m, "\n"); break; } /* insert the same text once or more */ for (reps = cnt, wasdot = doingdot; reps > 0; reps--, doingdot = TRUE) { m = input(m, m, WHEN_VIINP, above) + 1; } if (markidx(m) > 0) { m--; } doingdot = wasdot; } #ifndef CRUNCH # ifndef NO_EXTENSIONS if (key == 'i' && *o_inputmode && mode == MODE_VI) { msg("Now in command mode! To return to input mode, hit "); } # endif #endif return m; } /* This starts input mode with some text deleted */ MARK v_change(m, n) MARK m, n; /* the range of text to change */ { int lnmode; /* is this a line-mode change? */ /* swap them if they're in reverse order */ if (m > n) { MARK tmp; tmp = m; m = n; n = tmp; } /* for line mode, retain the last newline char */ lnmode = (markidx(m) == 0 && markidx(n) == 0 && m != n); if (lnmode) { n -= BLKSIZE; pfetch(markline(n)); n = (n & ~(BLKSIZE - 1)) + plen; } ChangeText { cut(m, n); m = input(m, n, WHEN_VIINP, FALSE); } return m; } /* This function replaces a given number of characters with input */ MARK v_subst(m, cnt) MARK m; /* where substitutions start */ long cnt; /* number of chars to replace */ { DEFAULT(1); /* make sure we don't try replacing past EOL */ pfetch(markline(m)); if (markidx(m) + cnt > plen) { cnt = plen - markidx(m); } /* Go for it! */ ChangeText { cut(m, m + cnt); m = input(m, m + cnt, WHEN_VIINP, FALSE); } return m; } /* This calls the ex "join" command to join some lines together */ MARK v_join(m, cnt) MARK m; /* the first line to be joined */ long cnt; /* number of other lines to join */ { MARK joint; /* where the lines were joined */ DEFAULT(1); /* figure out where the joint will be */ pfetch(markline(m)); joint = (m & ~(BLKSIZE - 1)) + plen; /* join the lines */ cmd_join(m, m + MARK_AT_LINE(cnt), CMD_JOIN, 0, ""); /* the cursor should be left at the joint */ return joint; } /* This calls the ex "<" command to shift some lines left */ MARK v_lshift(m, n) MARK m, n; /* range of lines to shift */ { /* adjust for inclusive endmarks in ex */ n -= BLKSIZE; cmd_shift(m, n, CMD_SHIFTL, FALSE, (char *)0); return m; } /* This calls the ex ">" command to shift some lines right */ MARK v_rshift(m, n) MARK m, n; /* range of lines to shift */ { /* adjust for inclusive endmarks in ex */ n -= BLKSIZE; cmd_shift(m, n, CMD_SHIFTR, FALSE, (char *)0); return m; } /* This filters some lines through a preset program, to reformat them */ MARK v_reformat(m, n) MARK m, n; /* range of lines to shift */ { /* adjust for inclusive endmarks in ex */ n -= BLKSIZE; /* run the filter command */ filter(m, n, o_equalprg, TRUE); redraw(MARK_UNSET, FALSE); return m; } /* This runs some lines through a filter program */ MARK v_filter(m, n) MARK m, n; /* range of lines to shift */ { char cmdln[150]; /* a shell command line */ /* adjust for inclusive endmarks in ex */ n -= BLKSIZE; if (vgets('!', cmdln, sizeof(cmdln)) > 0) { filter(m, n, cmdln, TRUE); } redraw(MARK_UNSET, FALSE); return m; } /* This function runs the ex "file" command to show the file's status */ MARK v_status() { cmd_file(cursor, cursor, CMD_FILE, 0, ""); return cursor; } /* This function runs the ":&" command to repeat the previous :s// */ MARK v_again(m, n) MARK m, n; { cmd_substitute(m, n - BLKSIZE, CMD_SUBAGAIN, TRUE, ""); return cursor; } /* This function switches to the previous file, if possible */ MARK v_switch() { if (!*prevorig) msg("No previous file"); else { strcpy(tmpblk.c, prevorig); cmd_edit(cursor, cursor, CMD_EDIT, 0, tmpblk.c); } return cursor; } /* This function does a tag search on a keyword */ /*ARGSUSED*/ MARK v_tag(keyword, m, cnt) char *keyword; MARK m; long cnt; { /* move the cursor to the start of the tag name, where m is */ cursor = m; /* perform the tag search */ cmd_tag(cursor, cursor, CMD_TAG, 0, keyword); return cursor; } #ifndef NO_EXTENSIONS /* This function looks up a keyword by calling the helpprog program */ /*ARGSUSED*/ MARK v_keyword(keyword, m, cnt) char *keyword; MARK m; long cnt; { int waswarn; char cmdline[130]; move(LINES - 1, 0); addstr("---------------------------------------------------------\n"); clrtoeol(); refresh(); sprintf(cmdline, "%s %s", o_keywordprg, keyword); waswarn = *o_warn; *o_warn = FALSE; suspend_curses(); if (system(cmdline)) { addstr("<<< failed >>>\n"); } resume_curses(FALSE); mode = MODE_VI; redraw(MARK_UNSET, FALSE); *o_warn = waswarn; return m; } MARK v_increment(keyword, m, cnt) char *keyword; MARK m; long cnt; { static sign; char newval[12]; long atol(); DEFAULT(1); /* get one more keystroke, unless doingdot */ if (!doingdot) { sign = getkey(0); } /* adjust the number, based on that second keystroke */ switch (sign) { case '+': case '#': cnt = atol(keyword) + cnt; break; case '-': cnt = atol(keyword) - cnt; break; case '=': break; default: return MARK_UNSET; } sprintf(newval, "%ld", cnt); ChangeText { change(m, m + strlen(keyword), newval); } return m; } #endif /* This function acts like the EX command "xit" */ /*ARGSUSED*/ MARK v_xit(m, cnt, key) MARK m; /* ignored */ long cnt; /* ignored */ int key; /* must be a second 'Z' */ { /* if second char wasn't 'Z', fail */ if (key != 'Z') { return MARK_UNSET; } /* move the cursor to the bottom of the screen */ move(LINES - 1, 0); clrtoeol(); /* do the xit command */ cmd_xit(m, m, CMD_XIT, FALSE, ""); /* return the cursor */ return m; } /* This function undoes changes to a single line, if possible */ MARK v_undoline(m) MARK m; /* where we hope to undo the change */ { /* make sure we have the right line in the buffer */ if (markline(m) != U_line) { return MARK_UNSET; } /* fix it */ ChangeText { strcat(U_text, "\n"); change(MARK_AT_LINE(U_line), MARK_AT_LINE(U_line + 1), U_text); } /* nothing in the buffer anymore */ U_line = -1L; /* return, with the cursor at the front of the line */ return m & ~(BLKSIZE - 1); } #ifndef NO_ERRLIST MARK v_errlist(m) MARK m; { cmd_errlist(m, m, CMD_ERRLIST, FALSE, ""); return cursor; } #endif #ifndef NO_AT /*ARGSUSED*/ MARK v_at(m, cnt, key) MARK m; long cnt; int key; { int size; size = cb2str(key, tmpblk.c, BLKSIZE); if (size <= 0 || size == BLKSIZE) { return MARK_UNSET; } execmap(0, tmpblk.c, FALSE); return cursor; } #endif #ifdef SIGTSTP MARK v_suspend() { cmd_suspend(MARK_UNSET, MARK_UNSET, CMD_SUSPEND, FALSE, ""); return MARK_UNSET; } #endif #ifndef NO_VISIBLE /*ARGSUSED*/ MARK v_start(m, cnt, cmd) MARK m; /* starting point for a v or V command */ long cnt; /* ignored */ int cmd; /* either 'v' or 'V' */ { if (V_from) { V_from = MARK_UNSET; } else { V_from = m; V_linemd = isupper(cmd); } return m; } #endif #ifndef NO_POPUP # define MENU_HEIGHT 11 # define MENU_WIDTH 23 MARK v_popup(m, n) MARK m, n; /* the range of text to change */ { int i; int y, x; /* position where the window will pop up at */ int key; /* keystroke from the user */ int sel; /* index of the selected operation */ static int dfltsel;/* default value of sel */ static char *labels[11] = { "ESC cancel! ", " d delete (cut) ", " y yank (copy) ", " p paste after ", " P paste before ", " > more indented ", " < less indented ", " = reformat ", " ! external filter ", " ZZ save & exit ", " u undo previous " }; /* try to position the menu near the cursor */ x = physcol - (MENU_WIDTH / 2); if (x < 0) x = 0; else if (x + MENU_WIDTH + 2 > COLS) x = COLS - MENU_WIDTH - 2; if (markline(cursor) < topline || markline(cursor) > botline) y = 0; else if (markline(cursor) + 1L + MENU_HEIGHT > botline) y = (int)(markline(cursor) - topline) - MENU_HEIGHT; else y = (int)(markline(cursor) - topline) + 1L; /* draw the menu */ for (sel = 0; sel < MENU_HEIGHT; sel++) { move(y + sel, x); do_POPUP(); if (sel == dfltsel) qaddstr("-->"); else qaddstr(" "); qaddstr(labels[sel]); do_SE(); } /* get a selection */ move(y + dfltsel, x + 4); for (sel = dfltsel; (key = getkey(WHEN_POPUP)) != '\\' && key != '\r'; ) { /* erase the selection arrow */ move(y + sel, x); do_POPUP(); qaddstr(" "); qaddstr(labels[sel]); do_SE(); /* process the user's keystroke */ if (key == 'j' && sel < MENU_HEIGHT - 1) { sel++; } else if (key == 'k' && sel > 0) { sel--; } else if (key == '\033') { sel = 0; break; } else { for (i = 1; i < MENU_HEIGHT && labels[i][1] != key; i++) { } if (i < MENU_HEIGHT) { sel = i; break; } } /* redraw the arrow, possibly in a new place */ move(y + sel, x); do_POPUP(); qaddstr("-->"); qaddstr(labels[sel]); do_SE(); move(y + sel, x + 4); } /* in most cases, the default selection is "paste after" */ dfltsel = 3; /* perform the appropriate action */ switch (sel) { case 0: m = cursor; dfltsel = 0; break; case 1: /* delete (cut) */ m = v_delete(m, n); break; case 2: /* yank (copy) */ m = v_yank(m, n); break; case 3: /* paste after */ m = v_paste(n, 1L, 'P'); break; case 4: /* paste before */ m = v_paste(m, 1L, 'P'); dfltsel = 4; break; case 5: /* more indented */ m = v_rshift(m, n); dfltsel = 5; break; case 6: /* less indented */ m = v_lshift(m, n); dfltsel = 6; break; case 7: /* reformat */ m = v_reformat(m, n); dfltsel = 7; break; case 8: /* external filter */ m = v_filter(m, n); dfltsel = 0; break; case 9: /* save & exit */ /* get confirmation first */ do { key = getkey(0); } while (key != '\\' && key != 'Z' && key != '\r' /* good */ && key != '\033'); /* bad */ if (key != '\033') { m = v_xit(m, 0L, 'Z'); } break; case 10: /* undo previous */ m = v_undo(m); dfltsel = 9; break; } /* arrange for the menu to be erased (except that "chg from kbd" * already erased it, and "save & exit" doesn't care) */ if (sel != 5 && sel != 9) redraw(MARK_UNSET, FALSE); return m; } #endif /* undef NO_POPUP */