source: trunk/minix/commands/pax/cpio.c@ 15

Last change on this file since 15 was 9, checked in by Mattia Monga, 14 years ago

Minix 3.1.2a
File size: 28.8 KB
Line 
1/*-
2 * Copyright (c) 1992 Keith Muller.
3 * Copyright (c) 1992, 1993
4 * The Regents of the University of California. All rights reserved.
5 *
6 * This code is derived from software contributed to Berkeley by
7 * Keith Muller of the University of California, San Diego.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 4. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 */
33
34#ifndef lint
35#if 0
36static char sccsid[] = "@(#)cpio.c 8.1 (Berkeley) 5/31/93";
37#endif
38#endif /* not lint */
39
40#include <sys/types.h>
41#include <sys/time.h>
42#include <sys/stat.h>
43#include <string.h>
44#include <stdint.h>
45#include <stdio.h>
46#include <unistd.h>
47#include <stdlib.h>
48#include "pax.h"
49#include "cpio.h"
50#include "extern.h"
51
52static int rd_nm(ARCHD *, int);
53static int rd_ln_nm(ARCHD *);
54static int com_rd(ARCHD *);
55
56/*
57 * Routines which support the different cpio versions
58 */
59
60static int swp_head; /* binary cpio header byte swap */
61
62/*
63 * Routines common to all versions of cpio
64 */
65
66/*
67 * cpio_strd()
68 * Fire up the hard link detection code
69 * Return:
70 * 0 if ok -1 otherwise (the return values of lnk_start())
71 */
72
73int
74cpio_strd(void)
75{
76 return(lnk_start());
77}
78
79/*
80 * cpio_trail()
81 * Called to determine if a header block is a valid trailer. We are
82 * passed the block, the in_sync flag (which tells us we are in resync
83 * mode; looking for a valid header), and cnt (which starts at zero)
84 * which is used to count the number of empty blocks we have seen so far.
85 * Return:
86 * 0 if a valid trailer, -1 if not a valid trailer,
87 */
88
89int
90cpio_trail(ARCHD *arcn)
91{
92 /*
93 * look for trailer id in file we are about to process
94 */
95 if ((strcmp(arcn->name, TRAILER) == 0) && (arcn->sb.st_size == 0))
96 return(0);
97 return(-1);
98}
99
100/*
101 * com_rd()
102 * operations common to all cpio read functions.
103 * Return:
104 * 0
105 */
106
107static int
108com_rd(ARCHD *arcn)
109{
110 arcn->skip = 0;
111 arcn->pat = NULL;
112 arcn->org_name = arcn->name;
113 switch(arcn->sb.st_mode & C_IFMT) {
114 case C_ISFIFO:
115 arcn->type = PAX_FIF;
116 break;
117 case C_ISDIR:
118 arcn->type = PAX_DIR;
119 break;
120 case C_ISBLK:
121 arcn->type = PAX_BLK;
122 break;
123 case C_ISCHR:
124 arcn->type = PAX_CHR;
125 break;
126 case C_ISLNK:
127 arcn->type = PAX_SLK;
128 break;
129 case C_ISOCK:
130 arcn->type = PAX_SCK;
131 break;
132 case C_ISCTG:
133 case C_ISREG:
134 default:
135 /*
136 * we have file data, set up skip (pad is set in the format
137 * specific sections)
138 */
139 arcn->sb.st_mode = (arcn->sb.st_mode & 0xfff) | C_ISREG;
140 arcn->type = PAX_REG;
141 arcn->skip = arcn->sb.st_size;
142 break;
143 }
144 if (chk_lnk(arcn) < 0)
145 return(-1);
146 return(0);
147}
148
149/*
150 * cpio_end_wr()
151 * write the special file with the name trailer in the proper format
152 * Return:
153 * result of the write of the trailer from the cpio specific write func
154 */
155
156int
157cpio_endwr(void)
158{
159 ARCHD last;
160
161 /*
162 * create a trailer request and call the proper format write function
163 */
164 memset(&last, 0, sizeof(last));
165 last.nlen = sizeof(TRAILER) - 1;
166 last.type = PAX_REG;
167 last.sb.st_nlink = 1;
168 (void)strcpy(last.name, TRAILER);
169 return((*frmt->wr)(&last));
170}
171
172/*
173 * rd_nam()
174 * read in the file name which follows the cpio header
175 * Return:
176 * 0 if ok, -1 otherwise
177 */
178
179static int
180rd_nm(ARCHD *arcn, int nsz)
181{
182 /*
183 * do not even try bogus values
184 */
185 if ((nsz == 0) || (nsz > (int)sizeof(arcn->name))) {
186 paxwarn(1, "Cpio file name length %d is out of range", nsz);
187 return(-1);
188 }
189
190 /*
191 * read the name and make sure it is not empty and is \0 terminated
192 */
193 if ((rd_wrbuf(arcn->name,nsz) != nsz) || (arcn->name[nsz-1] != '\0') ||
194 (arcn->name[0] == '\0')) {
195 paxwarn(1, "Cpio file name in header is corrupted");
196 return(-1);
197 }
198 return(0);
199}
200
201/*
202 * rd_ln_nm()
203 * read in the link name for a file with links. The link name is stored
204 * like file data (and is NOT \0 terminated!)
205 * Return:
206 * 0 if ok, -1 otherwise
207 */
208
209static int
210rd_ln_nm(ARCHD *arcn)
211{
212 /*
213 * check the length specified for bogus values
214 */
215 if ((arcn->sb.st_size == 0) ||
216 ((size_t)arcn->sb.st_size >= sizeof(arcn->ln_name))) {
217# ifdef NET2_STAT
218 paxwarn(1, "Cpio link name length is invalid: %lu",
219 arcn->sb.st_size);
220# else
221 paxwarn(1, "Cpio link name length is invalid: %ju",
222 (uintmax_t)arcn->sb.st_size);
223# endif
224 return(-1);
225 }
226
227 /*
228 * read in the link name and \0 terminate it
229 */
230 if (rd_wrbuf(arcn->ln_name, (int)arcn->sb.st_size) !=
231 (int)arcn->sb.st_size) {
232 paxwarn(1, "Cpio link name read error");
233 return(-1);
234 }
235 arcn->ln_nlen = arcn->sb.st_size;
236 arcn->ln_name[arcn->ln_nlen] = '\0';
237
238 /*
239 * watch out for those empty link names
240 */
241 if (arcn->ln_name[0] == '\0') {
242 paxwarn(1, "Cpio link name is corrupt");
243 return(-1);
244 }
245 return(0);
246}
247
248/*
249 * Routines common to the extended byte oriented cpio format
250 */
251
252/*
253 * cpio_id()
254 * determine if a block given to us is a valid extended byte oriented
255 * cpio header
256 * Return:
257 * 0 if a valid header, -1 otherwise
258 */
259
260int
261cpio_id(char *blk, int size)
262{
263 if ((size < (int)sizeof(HD_CPIO)) ||
264 (strncmp(blk, AMAGIC, sizeof(AMAGIC) - 1) != 0))
265 return(-1);
266 return(0);
267}
268
269/*
270 * cpio_rd()
271 * determine if a buffer is a byte oriented extended cpio archive entry.
272 * convert and store the values in the ARCHD parameter.
273 * Return:
274 * 0 if a valid header, -1 otherwise.
275 */
276
277int
278cpio_rd(ARCHD *arcn, char *buf)
279{
280 int nsz;
281 HD_CPIO *hd;
282
283 /*
284 * check that this is a valid header, if not return -1
285 */
286 if (cpio_id(buf, sizeof(HD_CPIO)) < 0)
287 return(-1);
288 hd = (HD_CPIO *)buf;
289
290 /*
291 * byte oriented cpio (posix) does not have padding! extract the octal
292 * ascii fields from the header
293 */
294 arcn->pad = 0L;
295 arcn->sb.st_dev = (dev_t)asc_ul(hd->c_dev, sizeof(hd->c_dev), OCT);
296 arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), OCT);
297 arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), OCT);
298 arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), OCT);
299 arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), OCT);
300 arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
301 OCT);
302 arcn->sb.st_rdev = (dev_t)asc_ul(hd->c_rdev, sizeof(hd->c_rdev), OCT);
303#ifdef NET2_STAT
304 arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime, sizeof(hd->c_mtime),
305 OCT);
306#else
307 arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime, sizeof(hd->c_mtime),
308 OCT);
309#endif
310 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
311#ifdef NET2_STAT
312 arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize,sizeof(hd->c_filesize),
313 OCT);
314#else
315 arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,sizeof(hd->c_filesize),
316 OCT);
317#endif
318
319 /*
320 * check name size and if valid, read in the name of this entry (name
321 * follows header in the archive)
322 */
323 if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),OCT)) < 2)
324 return(-1);
325 arcn->nlen = nsz - 1;
326 if (rd_nm(arcn, nsz) < 0)
327 return(-1);
328
329 if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
330 /*
331 * no link name to read for this file
332 */
333 arcn->ln_nlen = 0;
334 arcn->ln_name[0] = '\0';
335 return(com_rd(arcn));
336 }
337
338 /*
339 * check link name size and read in the link name. Link names are
340 * stored like file data.
341 */
342 if (rd_ln_nm(arcn) < 0)
343 return(-1);
344
345 /*
346 * we have a valid header (with a link)
347 */
348 return(com_rd(arcn));
349}
350
351/*
352 * cpio_endrd()
353 * no cleanup needed here, just return size of the trailer (for append)
354 * Return:
355 * size of trailer header in this format
356 */
357
358off_t
359cpio_endrd(void)
360{
361 return((off_t)(sizeof(HD_CPIO) + sizeof(TRAILER)));
362}
363
364/*
365 * cpio_stwr()
366 * start up the device mapping table
367 * Return:
368 * 0 if ok, -1 otherwise (what dev_start() returns)
369 */
370
371int
372cpio_stwr(void)
373{
374 return(dev_start());
375}
376
377/*
378 * cpio_wr()
379 * copy the data in the ARCHD to buffer in extended byte oriented cpio
380 * format.
381 * Return
382 * 0 if file has data to be written after the header, 1 if file has NO
383 * data to write after the header, -1 if archive write failed
384 */
385
386int
387cpio_wr(ARCHD *arcn)
388{
389 HD_CPIO *hd;
390 int nsz;
391 char hdblk[sizeof(HD_CPIO)];
392
393 /*
394 * check and repair truncated device and inode fields in the header
395 */
396 if (map_dev(arcn, (u_long)CPIO_MASK, (u_long)CPIO_MASK) < 0)
397 return(-1);
398
399 arcn->pad = 0L;
400 nsz = arcn->nlen + 1;
401 hd = (HD_CPIO *)hdblk;
402 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
403 arcn->sb.st_rdev = 0;
404
405 switch(arcn->type) {
406 case PAX_CTG:
407 case PAX_REG:
408 case PAX_HRG:
409 /*
410 * set data size for file data
411 */
412# ifdef NET2_STAT
413 if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize,
414 sizeof(hd->c_filesize), OCT)) {
415# else
416 if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
417 sizeof(hd->c_filesize), OCT)) {
418# endif
419 paxwarn(1,"File is too large for cpio format %s",
420 arcn->org_name);
421 return(1);
422 }
423 break;
424 case PAX_SLK:
425 /*
426 * set data size to hold link name
427 */
428 if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
429 sizeof(hd->c_filesize), OCT))
430 goto out;
431 break;
432 default:
433 /*
434 * all other file types have no file data
435 */
436 if (ul_asc((u_long)0, hd->c_filesize, sizeof(hd->c_filesize),
437 OCT))
438 goto out;
439 break;
440 }
441
442 /*
443 * copy the values to the header using octal ascii
444 */
445 if (ul_asc((u_long)MAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) ||
446 ul_asc((u_long)arcn->sb.st_dev, hd->c_dev, sizeof(hd->c_dev),
447 OCT) ||
448 ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
449 OCT) ||
450 ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
451 OCT) ||
452 ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
453 OCT) ||
454 ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
455 OCT) ||
456 ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
457 OCT) ||
458 ul_asc((u_long)arcn->sb.st_rdev, hd->c_rdev, sizeof(hd->c_rdev),
459 OCT) ||
460 ul_asc((u_long)arcn->sb.st_mtime,hd->c_mtime,sizeof(hd->c_mtime),
461 OCT) ||
462 ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), OCT))
463 goto out;
464
465 /*
466 * write the file name to the archive
467 */
468 if ((wr_rdbuf(hdblk, (int)sizeof(HD_CPIO)) < 0) ||
469 (wr_rdbuf(arcn->name, nsz) < 0)) {
470 paxwarn(1, "Unable to write cpio header for %s", arcn->org_name);
471 return(-1);
472 }
473
474 /*
475 * if this file has data, we are done. The caller will write the file
476 * data, if we are link tell caller we are done, go to next file
477 */
478 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
479 (arcn->type == PAX_HRG))
480 return(0);
481 if (arcn->type != PAX_SLK)
482 return(1);
483
484 /*
485 * write the link name to the archive, tell the caller to go to the
486 * next file as we are done.
487 */
488 if (wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) {
489 paxwarn(1,"Unable to write cpio link name for %s",arcn->org_name);
490 return(-1);
491 }
492 return(1);
493
494 out:
495 /*
496 * header field is out of range
497 */
498 paxwarn(1, "Cpio header field is too small to store file %s",
499 arcn->org_name);
500 return(1);
501}
502
503/*
504 * Routines common to the system VR4 version of cpio (with/without file CRC)
505 */
506
507/*
508 * vcpio_id()
509 * determine if a block given to us is a valid system VR4 cpio header
510 * WITHOUT crc. WATCH it the magic cookies are in OCTAL, the header
511 * uses HEX
512 * Return:
513 * 0 if a valid header, -1 otherwise
514 */
515
516int
517vcpio_id(char *blk, int size)
518{
519 if ((size < (int)sizeof(HD_VCPIO)) ||
520 (strncmp(blk, AVMAGIC, sizeof(AVMAGIC) - 1) != 0))
521 return(-1);
522 return(0);
523}
524
525/*
526 * crc_id()
527 * determine if a block given to us is a valid system VR4 cpio header
528 * WITH crc. WATCH it the magic cookies are in OCTAL the header uses HEX
529 * Return:
530 * 0 if a valid header, -1 otherwise
531 */
532
533int
534crc_id(char *blk, int size)
535{
536 if ((size < (int)sizeof(HD_VCPIO)) ||
537 (strncmp(blk, AVCMAGIC, (int)sizeof(AVCMAGIC) - 1) != 0))
538 return(-1);
539 return(0);
540}
541
542/*
543 * crc_strd()
544 w set file data CRC calculations. Fire up the hard link detection code
545 * Return:
546 * 0 if ok -1 otherwise (the return values of lnk_start())
547 */
548
549int
550crc_strd(void)
551{
552 docrc = 1;
553 return(lnk_start());
554}
555
556/*
557 * vcpio_rd()
558 * determine if a buffer is a system VR4 archive entry. (with/without CRC)
559 * convert and store the values in the ARCHD parameter.
560 * Return:
561 * 0 if a valid header, -1 otherwise.
562 */
563
564int
565vcpio_rd(ARCHD *arcn, char *buf)
566{
567 HD_VCPIO *hd;
568 dev_t devminor;
569 dev_t devmajor;
570 int nsz;
571
572 /*
573 * during the id phase it was determined if we were using CRC, use the
574 * proper id routine.
575 */
576 if (docrc) {
577 if (crc_id(buf, sizeof(HD_VCPIO)) < 0)
578 return(-1);
579 } else {
580 if (vcpio_id(buf, sizeof(HD_VCPIO)) < 0)
581 return(-1);
582 }
583
584 hd = (HD_VCPIO *)buf;
585 arcn->pad = 0L;
586
587 /*
588 * extract the hex ascii fields from the header
589 */
590 arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), HEX);
591 arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), HEX);
592 arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), HEX);
593 arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), HEX);
594#ifdef NET2_STAT
595 arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime,sizeof(hd->c_mtime),HEX);
596#else
597 arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime,sizeof(hd->c_mtime),HEX);
598#endif
599 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
600#ifdef NET2_STAT
601 arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize,
602 sizeof(hd->c_filesize), HEX);
603#else
604 arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,
605 sizeof(hd->c_filesize), HEX);
606#endif
607 arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
608 HEX);
609 devmajor = (dev_t)asc_ul(hd->c_maj, sizeof(hd->c_maj), HEX);
610 devminor = (dev_t)asc_ul(hd->c_min, sizeof(hd->c_min), HEX);
611 arcn->sb.st_dev = TODEV(devmajor, devminor);
612 devmajor = (dev_t)asc_ul(hd->c_rmaj, sizeof(hd->c_maj), HEX);
613 devminor = (dev_t)asc_ul(hd->c_rmin, sizeof(hd->c_min), HEX);
614 arcn->sb.st_rdev = TODEV(devmajor, devminor);
615 arcn->crc = asc_ul(hd->c_chksum, sizeof(hd->c_chksum), HEX);
616
617 /*
618 * check the length of the file name, if ok read it in, return -1 if
619 * bogus
620 */
621 if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),HEX)) < 2)
622 return(-1);
623 arcn->nlen = nsz - 1;
624 if (rd_nm(arcn, nsz) < 0)
625 return(-1);
626
627 /*
628 * skip padding. header + filename is aligned to 4 byte boundries
629 */
630 if (rd_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)
631 return(-1);
632
633 /*
634 * if not a link (or a file with no data), calculate pad size (for
635 * padding which follows the file data), clear the link name and return
636 */
637 if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
638 /*
639 * we have a valid header (not a link)
640 */
641 arcn->ln_nlen = 0;
642 arcn->ln_name[0] = '\0';
643 arcn->pad = VCPIO_PAD(arcn->sb.st_size);
644 return(com_rd(arcn));
645 }
646
647 /*
648 * read in the link name and skip over the padding
649 */
650 if ((rd_ln_nm(arcn) < 0) ||
651 (rd_skip((off_t)(VCPIO_PAD(arcn->sb.st_size))) < 0))
652 return(-1);
653
654 /*
655 * we have a valid header (with a link)
656 */
657 return(com_rd(arcn));
658}
659
660/*
661 * vcpio_endrd()
662 * no cleanup needed here, just return size of the trailer (for append)
663 * Return:
664 * size of trailer header in this format
665 */
666
667off_t
668vcpio_endrd(void)
669{
670 return((off_t)(sizeof(HD_VCPIO) + sizeof(TRAILER) +
671 (VCPIO_PAD(sizeof(HD_VCPIO) + sizeof(TRAILER)))));
672}
673
674/*
675 * crc_stwr()
676 * start up the device mapping table, enable crc file calculation
677 * Return:
678 * 0 if ok, -1 otherwise (what dev_start() returns)
679 */
680
681int
682crc_stwr(void)
683{
684 docrc = 1;
685 return(dev_start());
686}
687
688/*
689 * vcpio_wr()
690 * copy the data in the ARCHD to buffer in system VR4 cpio
691 * (with/without crc) format.
692 * Return
693 * 0 if file has data to be written after the header, 1 if file has
694 * NO data to write after the header, -1 if archive write failed
695 */
696
697int
698vcpio_wr(ARCHD *arcn)
699{
700 HD_VCPIO *hd;
701 unsigned int nsz;
702 char hdblk[sizeof(HD_VCPIO)];
703
704 /*
705 * check and repair truncated device and inode fields in the cpio
706 * header
707 */
708 if (map_dev(arcn, (u_long)VCPIO_MASK, (u_long)VCPIO_MASK) < 0)
709 return(-1);
710 nsz = arcn->nlen + 1;
711 hd = (HD_VCPIO *)hdblk;
712 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
713 arcn->sb.st_rdev = 0;
714
715 /*
716 * add the proper magic value depending whether we were asked for
717 * file data crc's, and the crc if needed.
718 */
719 if (docrc) {
720 if (ul_asc((u_long)VCMAGIC, hd->c_magic, sizeof(hd->c_magic),
721 OCT) ||
722 ul_asc((u_long)arcn->crc,hd->c_chksum,sizeof(hd->c_chksum),
723 HEX))
724 goto out;
725 } else {
726 if (ul_asc((u_long)VMAGIC, hd->c_magic, sizeof(hd->c_magic),
727 OCT) ||
728 ul_asc((u_long)0L, hd->c_chksum, sizeof(hd->c_chksum),HEX))
729 goto out;
730 }
731
732 switch(arcn->type) {
733 case PAX_CTG:
734 case PAX_REG:
735 case PAX_HRG:
736 /*
737 * caller will copy file data to the archive. tell him how
738 * much to pad.
739 */
740 arcn->pad = VCPIO_PAD(arcn->sb.st_size);
741# ifdef NET2_STAT
742 if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize,
743 sizeof(hd->c_filesize), HEX)) {
744# else
745 if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
746 sizeof(hd->c_filesize), HEX)) {
747# endif
748 paxwarn(1,"File is too large for sv4cpio format %s",
749 arcn->org_name);
750 return(1);
751 }
752 break;
753 case PAX_SLK:
754 /*
755 * no file data for the caller to process, the file data has
756 * the size of the link
757 */
758 arcn->pad = 0L;
759 if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
760 sizeof(hd->c_filesize), HEX))
761 goto out;
762 break;
763 default:
764 /*
765 * no file data for the caller to process
766 */
767 arcn->pad = 0L;
768 if (ul_asc((u_long)0L, hd->c_filesize, sizeof(hd->c_filesize),
769 HEX))
770 goto out;
771 break;
772 }
773
774 /*
775 * set the other fields in the header
776 */
777 if (ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
778 HEX) ||
779 ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
780 HEX) ||
781 ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
782 HEX) ||
783 ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
784 HEX) ||
785 ul_asc((u_long)arcn->sb.st_mtime, hd->c_mtime, sizeof(hd->c_mtime),
786 HEX) ||
787 ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
788 HEX) ||
789 ul_asc((u_long)major(arcn->sb.st_dev),hd->c_maj, sizeof(hd->c_maj),
790 HEX) ||
791 ul_asc((u_long)minor(arcn->sb.st_dev),hd->c_min, sizeof(hd->c_min),
792 HEX) ||
793 ul_asc((u_long)major(arcn->sb.st_rdev),hd->c_rmaj,sizeof(hd->c_maj),
794 HEX) ||
795 ul_asc((u_long)minor(arcn->sb.st_rdev),hd->c_rmin,sizeof(hd->c_min),
796 HEX) ||
797 ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), HEX))
798 goto out;
799
800 /*
801 * write the header, the file name and padding as required.
802 */
803 if ((wr_rdbuf(hdblk, (int)sizeof(HD_VCPIO)) < 0) ||
804 (wr_rdbuf(arcn->name, (int)nsz) < 0) ||
805 (wr_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)) {
806 paxwarn(1,"Could not write sv4cpio header for %s",arcn->org_name);
807 return(-1);
808 }
809
810 /*
811 * if we have file data, tell the caller we are done, copy the file
812 */
813 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
814 (arcn->type == PAX_HRG))
815 return(0);
816
817 /*
818 * if we are not a link, tell the caller we are done, go to next file
819 */
820 if (arcn->type != PAX_SLK)
821 return(1);
822
823 /*
824 * write the link name, tell the caller we are done.
825 */
826 if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
827 (wr_skip((off_t)(VCPIO_PAD(arcn->ln_nlen))) < 0)) {
828 paxwarn(1,"Could not write sv4cpio link name for %s",
829 arcn->org_name);
830 return(-1);
831 }
832 return(1);
833
834 out:
835 /*
836 * header field is out of range
837 */
838 paxwarn(1,"Sv4cpio header field is too small for file %s",arcn->org_name);
839 return(1);
840}
841
842/*
843 * Routines common to the old binary header cpio
844 */
845
846/*
847 * bcpio_id()
848 * determine if a block given to us is an old binary cpio header
849 * (with/without header byte swapping)
850 * Return:
851 * 0 if a valid header, -1 otherwise
852 */
853
854int
855bcpio_id(char *blk, int size)
856{
857 if (size < (int)sizeof(HD_BCPIO))
858 return(-1);
859
860 /*
861 * check both normal and byte swapped magic cookies
862 */
863 if (((u_short)SHRT_EXT(blk)) == MAGIC)
864 return(0);
865 if (((u_short)RSHRT_EXT(blk)) == MAGIC) {
866 if (!swp_head)
867 ++swp_head;
868 return(0);
869 }
870 return(-1);
871}
872
873/*
874 * bcpio_rd()
875 * determine if a buffer is an old binary archive entry. (It may have byte
876 * swapped header) convert and store the values in the ARCHD parameter.
877 * This is a very old header format and should not really be used.
878 * Return:
879 * 0 if a valid header, -1 otherwise.
880 */
881
882int
883bcpio_rd(ARCHD *arcn, char *buf)
884{
885 HD_BCPIO *hd;
886 int nsz;
887
888 /*
889 * check the header
890 */
891 if (bcpio_id(buf, sizeof(HD_BCPIO)) < 0)
892 return(-1);
893
894 arcn->pad = 0L;
895 hd = (HD_BCPIO *)buf;
896 if (swp_head) {
897 /*
898 * header has swapped bytes on 16 bit boundaries
899 */
900 arcn->sb.st_dev = (dev_t)(RSHRT_EXT(hd->h_dev));
901 arcn->sb.st_ino = (ino_t)(RSHRT_EXT(hd->h_ino));
902 arcn->sb.st_mode = (mode_t)(RSHRT_EXT(hd->h_mode));
903 arcn->sb.st_uid = (uid_t)(RSHRT_EXT(hd->h_uid));
904 arcn->sb.st_gid = (gid_t)(RSHRT_EXT(hd->h_gid));
905 arcn->sb.st_nlink = (nlink_t)(RSHRT_EXT(hd->h_nlink));
906 arcn->sb.st_rdev = (dev_t)(RSHRT_EXT(hd->h_rdev));
907 arcn->sb.st_mtime = (time_t)(RSHRT_EXT(hd->h_mtime_1));
908 arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) |
909 ((time_t)(RSHRT_EXT(hd->h_mtime_2)));
910 arcn->sb.st_size = (off_t)(RSHRT_EXT(hd->h_filesize_1));
911 arcn->sb.st_size = (arcn->sb.st_size << 16) |
912 ((off_t)(RSHRT_EXT(hd->h_filesize_2)));
913 nsz = (int)(RSHRT_EXT(hd->h_namesize));
914 } else {
915 arcn->sb.st_dev = (dev_t)(SHRT_EXT(hd->h_dev));
916 arcn->sb.st_ino = (ino_t)(SHRT_EXT(hd->h_ino));
917 arcn->sb.st_mode = (mode_t)(SHRT_EXT(hd->h_mode));
918 arcn->sb.st_uid = (uid_t)(SHRT_EXT(hd->h_uid));
919 arcn->sb.st_gid = (gid_t)(SHRT_EXT(hd->h_gid));
920 arcn->sb.st_nlink = (nlink_t)(SHRT_EXT(hd->h_nlink));
921 arcn->sb.st_rdev = (dev_t)(SHRT_EXT(hd->h_rdev));
922 arcn->sb.st_mtime = (time_t)(SHRT_EXT(hd->h_mtime_1));
923 arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) |
924 ((time_t)(SHRT_EXT(hd->h_mtime_2)));
925 arcn->sb.st_size = (off_t)(SHRT_EXT(hd->h_filesize_1));
926 arcn->sb.st_size = (arcn->sb.st_size << 16) |
927 ((off_t)(SHRT_EXT(hd->h_filesize_2)));
928 nsz = (int)(SHRT_EXT(hd->h_namesize));
929 }
930 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
931
932 /*
933 * check the file name size, if bogus give up. otherwise read the file
934 * name
935 */
936 if (nsz < 2)
937 return(-1);
938 arcn->nlen = nsz - 1;
939 if (rd_nm(arcn, nsz) < 0)
940 return(-1);
941
942 /*
943 * header + file name are aligned to 2 byte boundries, skip if needed
944 */
945 if (rd_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)
946 return(-1);
947
948 /*
949 * if not a link (or a file with no data), calculate pad size (for
950 * padding which follows the file data), clear the link name and return
951 */
952 if (((arcn->sb.st_mode & C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)){
953 /*
954 * we have a valid header (not a link)
955 */
956 arcn->ln_nlen = 0;
957 arcn->ln_name[0] = '\0';
958 arcn->pad = BCPIO_PAD(arcn->sb.st_size);
959 return(com_rd(arcn));
960 }
961
962 if ((rd_ln_nm(arcn) < 0) ||
963 (rd_skip((off_t)(BCPIO_PAD(arcn->sb.st_size))) < 0))
964 return(-1);
965
966 /*
967 * we have a valid header (with a link)
968 */
969 return(com_rd(arcn));
970}
971
972/*
973 * bcpio_endrd()
974 * no cleanup needed here, just return size of the trailer (for append)
975 * Return:
976 * size of trailer header in this format
977 */
978
979off_t
980bcpio_endrd(void)
981{
982 return((off_t)(sizeof(HD_BCPIO) + sizeof(TRAILER) +
983 (BCPIO_PAD(sizeof(HD_BCPIO) + sizeof(TRAILER)))));
984}
985
986/*
987 * bcpio_wr()
988 * copy the data in the ARCHD to buffer in old binary cpio format
989 * There is a real chance of field overflow with this critter. So we
990 * always check the conversion is ok. nobody in his their right mind
991 * should write an achive in this format...
992 * Return
993 * 0 if file has data to be written after the header, 1 if file has NO
994 * data to write after the header, -1 if archive write failed
995 */
996
997int
998bcpio_wr(ARCHD *arcn)
999{
1000 HD_BCPIO *hd;
1001 int nsz;
1002 char hdblk[sizeof(HD_BCPIO)];
1003 off_t t_offt;
1004 int t_int;
1005 time_t t_timet;
1006
1007 /*
1008 * check and repair truncated device and inode fields in the cpio
1009 * header
1010 */
1011 if (map_dev(arcn, (u_long)BCPIO_MASK, (u_long)BCPIO_MASK) < 0)
1012 return(-1);
1013
1014 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
1015 arcn->sb.st_rdev = 0;
1016 hd = (HD_BCPIO *)hdblk;
1017
1018 switch(arcn->type) {
1019 case PAX_CTG:
1020 case PAX_REG:
1021 case PAX_HRG:
1022 /*
1023 * caller will copy file data to the archive. tell him how
1024 * much to pad.
1025 */
1026 arcn->pad = BCPIO_PAD(arcn->sb.st_size);
1027 hd->h_filesize_1[0] = CHR_WR_0(arcn->sb.st_size);
1028 hd->h_filesize_1[1] = CHR_WR_1(arcn->sb.st_size);
1029 hd->h_filesize_2[0] = CHR_WR_2(arcn->sb.st_size);
1030 hd->h_filesize_2[1] = CHR_WR_3(arcn->sb.st_size);
1031 t_offt = (off_t)(SHRT_EXT(hd->h_filesize_1));
1032 t_offt = (t_offt<<16) | ((off_t)(SHRT_EXT(hd->h_filesize_2)));
1033 if (arcn->sb.st_size != t_offt) {
1034 paxwarn(1,"File is too large for bcpio format %s",
1035 arcn->org_name);
1036 return(1);
1037 }
1038 break;
1039 case PAX_SLK:
1040 /*
1041 * no file data for the caller to process, the file data has
1042 * the size of the link
1043 */
1044 arcn->pad = 0L;
1045 hd->h_filesize_1[0] = CHR_WR_0(arcn->ln_nlen);
1046 hd->h_filesize_1[1] = CHR_WR_1(arcn->ln_nlen);
1047 hd->h_filesize_2[0] = CHR_WR_2(arcn->ln_nlen);
1048 hd->h_filesize_2[1] = CHR_WR_3(arcn->ln_nlen);
1049 t_int = (int)(SHRT_EXT(hd->h_filesize_1));
1050 t_int = (t_int << 16) | ((int)(SHRT_EXT(hd->h_filesize_2)));
1051 if (arcn->ln_nlen != t_int)
1052 goto out;
1053 break;
1054 default:
1055 /*
1056 * no file data for the caller to process
1057 */
1058 arcn->pad = 0L;
1059 hd->h_filesize_1[0] = (char)0;
1060 hd->h_filesize_1[1] = (char)0;
1061 hd->h_filesize_2[0] = (char)0;
1062 hd->h_filesize_2[1] = (char)0;
1063 break;
1064 }
1065
1066 /*
1067 * build up the rest of the fields
1068 */
1069 hd->h_magic[0] = CHR_WR_2(MAGIC);
1070 hd->h_magic[1] = CHR_WR_3(MAGIC);
1071 hd->h_dev[0] = CHR_WR_2(arcn->sb.st_dev);
1072 hd->h_dev[1] = CHR_WR_3(arcn->sb.st_dev);
1073 if (arcn->sb.st_dev != (dev_t)(SHRT_EXT(hd->h_dev)))
1074 goto out;
1075 hd->h_ino[0] = CHR_WR_2(arcn->sb.st_ino);
1076 hd->h_ino[1] = CHR_WR_3(arcn->sb.st_ino);
1077 if (arcn->sb.st_ino != (ino_t)(SHRT_EXT(hd->h_ino)))
1078 goto out;
1079 hd->h_mode[0] = CHR_WR_2(arcn->sb.st_mode);
1080 hd->h_mode[1] = CHR_WR_3(arcn->sb.st_mode);
1081 if (arcn->sb.st_mode != (mode_t)(SHRT_EXT(hd->h_mode)))
1082 goto out;
1083 hd->h_uid[0] = CHR_WR_2(arcn->sb.st_uid);
1084 hd->h_uid[1] = CHR_WR_3(arcn->sb.st_uid);
1085 if (arcn->sb.st_uid != (uid_t)(SHRT_EXT(hd->h_uid)))
1086 goto out;
1087 hd->h_gid[0] = CHR_WR_2(arcn->sb.st_gid);
1088 hd->h_gid[1] = CHR_WR_3(arcn->sb.st_gid);
1089 if (arcn->sb.st_gid != (gid_t)(SHRT_EXT(hd->h_gid)))
1090 goto out;
1091 hd->h_nlink[0] = CHR_WR_2(arcn->sb.st_nlink);
1092 hd->h_nlink[1] = CHR_WR_3(arcn->sb.st_nlink);
1093 if (arcn->sb.st_nlink != (nlink_t)(SHRT_EXT(hd->h_nlink)))
1094 goto out;
1095 hd->h_rdev[0] = CHR_WR_2(arcn->sb.st_rdev);
1096 hd->h_rdev[1] = CHR_WR_3(arcn->sb.st_rdev);
1097 if (arcn->sb.st_rdev != (dev_t)(SHRT_EXT(hd->h_rdev)))
1098 goto out;
1099 hd->h_mtime_1[0] = CHR_WR_0(arcn->sb.st_mtime);
1100 hd->h_mtime_1[1] = CHR_WR_1(arcn->sb.st_mtime);
1101 hd->h_mtime_2[0] = CHR_WR_2(arcn->sb.st_mtime);
1102 hd->h_mtime_2[1] = CHR_WR_3(arcn->sb.st_mtime);
1103 t_timet = (time_t)(SHRT_EXT(hd->h_mtime_1));
1104 t_timet = (t_timet << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2)));
1105 if (arcn->sb.st_mtime != t_timet)
1106 goto out;
1107 nsz = arcn->nlen + 1;
1108 hd->h_namesize[0] = CHR_WR_2(nsz);
1109 hd->h_namesize[1] = CHR_WR_3(nsz);
1110 if (nsz != (int)(SHRT_EXT(hd->h_namesize)))
1111 goto out;
1112
1113 /*
1114 * write the header, the file name and padding as required.
1115 */
1116 if ((wr_rdbuf(hdblk, (int)sizeof(HD_BCPIO)) < 0) ||
1117 (wr_rdbuf(arcn->name, nsz) < 0) ||
1118 (wr_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)) {
1119 paxwarn(1, "Could not write bcpio header for %s", arcn->org_name);
1120 return(-1);
1121 }
1122
1123 /*
1124 * if we have file data, tell the caller we are done
1125 */
1126 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
1127 (arcn->type == PAX_HRG))
1128 return(0);
1129
1130 /*
1131 * if we are not a link, tell the caller we are done, go to next file
1132 */
1133 if (arcn->type != PAX_SLK)
1134 return(1);
1135
1136 /*
1137 * write the link name, tell the caller we are done.
1138 */
1139 if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
1140 (wr_skip((off_t)(BCPIO_PAD(arcn->ln_nlen))) < 0)) {
1141 paxwarn(1,"Could not write bcpio link name for %s",arcn->org_name);
1142 return(-1);
1143 }
1144 return(1);
1145
1146 out:
1147 /*
1148 * header field is out of range
1149 */
1150 paxwarn(1,"Bcpio header field is too small for file %s", arcn->org_name);
1151 return(1);
1152}
Note: See TracBrowser for help on using the repository browser.