source: trunk/minix/servers/fs/cache.c@ 20

/* The file system maintains a buffer cache to reduce the number of disk
 * accesses needed.  Whenever a read or write to the disk is done, a check is
 * first made to see if the block is in the cache.  This file manages the
 * cache.
 *
 * The entry points into this file are:
 *   get_block:   request to fetch a block for reading or writing from cache
 *   put_block:   return a block previously requested with get_block
 *   alloc_zone:  allocate a new zone (to increase the length of a file)
 *   free_zone:   release a zone (when a file is removed)
 *   invalidate:  remove all the cache blocks on some device
 *
 * Private functions:
 *   rw_block:    read or write a block from the disk itself
 */

#include "fs.h"
#include <minix/com.h>
#include "buf.h"
#include "file.h"
#include "fproc.h"
#include "super.h"

FORWARD _PROTOTYPE( void rm_lru, (struct buf *bp) );
FORWARD _PROTOTYPE( int rw_block, (struct buf *, int) );

/*===========================================================================*
 *                              get_block                                    *
 *===========================================================================*/
PUBLIC struct buf *get_block(dev, block, only_search)
register dev_t dev;             /* on which device is the block? */
register block_t block;         /* which block is wanted? */
int only_search;                /* if NO_READ, don't read, else act normal */
{
/* Check to see if the requested block is in the block cache.  If so, return
 * a pointer to it.  If not, evict some other block and fetch it (unless
 * 'only_search' is 1).  All the blocks in the cache that are not in use
 * are linked together in a chain, with 'front' pointing to the least recently
 * used block and 'rear' to the most recently used block.  If 'only_search' is
 * 1, the block being requested will be overwritten in its entirety, so it is
 * only necessary to see if it is in the cache; if it is not, any free buffer
 * will do.  It is not necessary to actually read the block in from disk.
 * If 'only_search' is PREFETCH, the block need not be read from the disk,
 * and the device is not to be marked on the block, so callers can tell if
 * the block returned is valid.
 * In addition to the LRU chain, there is also a hash chain to link together
 * blocks whose block numbers end with the same bit strings, for fast lookup.
 */

  int b;
  register struct buf *bp, *prev_ptr;

  /* Search the hash chain for (dev, block). Do_read() can use 
   * get_block(NO_DEV ...) to get an unnamed block to fill with zeros when
   * someone wants to read from a hole in a file, in which case this search
   * is skipped
   */
  if (dev != NO_DEV) {
        b = (int) block & HASH_MASK;
        bp = buf_hash[b];
        while (bp != NIL_BUF) {
                if (bp->b_blocknr == block && bp->b_dev == dev) {
                        /* Block needed has been found. */
                        if (bp->b_count == 0) rm_lru(bp);
                        bp->b_count++;  /* record that block is in use */

                        return(bp);
                } else {
                        /* This block is not the one sought. */
                        bp = bp->b_hash; /* move to next block on hash chain */
                }
        }
  }

  /* Desired block is not on available chain.  Take oldest block ('front'). */
  if ((bp = front) == NIL_BUF) panic(__FILE__,"all buffers in use", NR_BUFS);
  rm_lru(bp);

  /* Remove the block that was just taken from its hash chain. */
  b = (int) bp->b_blocknr & HASH_MASK;
  prev_ptr = buf_hash[b];
  if (prev_ptr == bp) {
        buf_hash[b] = bp->b_hash;
  } else {
        /* The block just taken is not on the front of its hash chain. */
        while (prev_ptr->b_hash != NIL_BUF)
                if (prev_ptr->b_hash == bp) {
                        prev_ptr->b_hash = bp->b_hash;  /* found it */
                        break;
                } else {
                        prev_ptr = prev_ptr->b_hash;    /* keep looking */
                }
  }

  /* If the block taken is dirty, make it clean by writing it to the disk.
   * Avoid hysteresis by flushing all other dirty blocks for the same device.
   */
  if (bp->b_dev != NO_DEV) {
        if (bp->b_dirt == DIRTY) flushall(bp->b_dev);
#if ENABLE_CACHE2
        put_block2(bp);
#endif
  }

  /* Fill in block's parameters and add it to the hash chain where it goes. */
  bp->b_dev = dev;              /* fill in device number */
  bp->b_blocknr = block;        /* fill in block number */
  bp->b_count++;                /* record that block is being used */
  b = (int) bp->b_blocknr & HASH_MASK;
  bp->b_hash = buf_hash[b];
  buf_hash[b] = bp;             /* add to hash list */

  /* Go get the requested block unless searching or prefetching. */
  if (dev != NO_DEV) {
#if ENABLE_CACHE2
        if (get_block2(bp, only_search)) /* in 2nd level cache */;
        else
#endif
        if (only_search == PREFETCH) bp->b_dev = NO_DEV;
        else
        if (only_search == NORMAL) {
                rw_block(bp, READING);
        }
  }
  return(bp);                   /* return the newly acquired block */
}

/*===========================================================================*
 *                              put_block                                    *
 *===========================================================================*/
PUBLIC void put_block(bp, block_type)
register struct buf *bp;        /* pointer to the buffer to be released */
int block_type;                 /* INODE_BLOCK, DIRECTORY_BLOCK, or whatever */
{
/* Return a block to the list of available blocks.   Depending on 'block_type'
 * it may be put on the front or rear of the LRU chain.  Blocks that are
 * expected to be needed again shortly (e.g., partially full data blocks)
 * go on the rear; blocks that are unlikely to be needed again shortly
 * (e.g., full data blocks) go on the front.  Blocks whose loss can hurt
 * the integrity of the file system (e.g., inode blocks) are written to
 * disk immediately if they are dirty.
 */
  if (bp == NIL_BUF) return;    /* it is easier to check here than in caller */

  bp->b_count--;                /* there is one use fewer now */
  if (bp->b_count != 0) return; /* block is still in use */

  bufs_in_use--;                /* one fewer block buffers in use */

  /* Put this block back on the LRU chain.  If the ONE_SHOT bit is set in
   * 'block_type', the block is not likely to be needed again shortly, so put
   * it on the front of the LRU chain where it will be the first one to be
   * taken when a free buffer is needed later.
   */
  if (bp->b_dev == DEV_RAM || (block_type & ONE_SHOT)) {
        /* Block probably won't be needed quickly. Put it on front of chain.
         * It will be the next block to be evicted from the cache.
         */
        bp->b_prev = NIL_BUF;
        bp->b_next = front;
        if (front == NIL_BUF)
                rear = bp;      /* LRU chain was empty */
        else
                front->b_prev = bp;
        front = bp;
  } else {
        /* Block probably will be needed quickly.  Put it on rear of chain.
         * It will not be evicted from the cache for a long time.
         */
        bp->b_prev = rear;
        bp->b_next = NIL_BUF;
        if (rear == NIL_BUF)
                front = bp;
        else
                rear->b_next = bp;
        rear = bp;
  }

  /* Some blocks are so important (e.g., inodes, indirect blocks) that they
   * should be written to the disk immediately to avoid messing up the file
   * system in the event of a crash.
   */
  if ((block_type & WRITE_IMMED) && bp->b_dirt==DIRTY && bp->b_dev != NO_DEV) {
                rw_block(bp, WRITING);
  } 
}

/*===========================================================================*
 *                              alloc_zone                                   *
 *===========================================================================*/
PUBLIC zone_t alloc_zone(dev, z)
dev_t dev;                      /* device where zone wanted */
zone_t z;                       /* try to allocate new zone near this one */
{
/* Allocate a new zone on the indicated device and return its number. */

  int major, minor;
  bit_t b, bit;
  struct super_block *sp;

  /* Note that the routine alloc_bit() returns 1 for the lowest possible
   * zone, which corresponds to sp->s_firstdatazone.  To convert a value
   * between the bit number, 'b', used by alloc_bit() and the zone number, 'z',
   * stored in the inode, use the formula:
   *     z = b + sp->s_firstdatazone - 1
   * Alloc_bit() never returns 0, since this is used for NO_BIT (failure).
   */
  sp = get_super(dev);

  /* If z is 0, skip initial part of the map known to be fully in use. */
  if (z == sp->s_firstdatazone) {
        bit = sp->s_zsearch;
  } else {
        bit = (bit_t) z - (sp->s_firstdatazone - 1);
  }
  b = alloc_bit(sp, ZMAP, bit);
  if (b == NO_BIT) {
        err_code = ENOSPC;
        major = (int) (sp->s_dev >> MAJOR) & BYTE;
        minor = (int) (sp->s_dev >> MINOR) & BYTE;
        printf("No space on %sdevice %d/%d\n",
                sp->s_dev == root_dev ? "root " : "", major, minor);
        return(NO_ZONE);
  }
  if (z == sp->s_firstdatazone) sp->s_zsearch = b;      /* for next time */
  return(sp->s_firstdatazone - 1 + (zone_t) b);
}

/*===========================================================================*
 *                              free_zone                                    *
 *===========================================================================*/
PUBLIC void free_zone(dev, numb)
dev_t dev;                              /* device where zone located */
zone_t numb;                            /* zone to be returned */
{
/* Return a zone. */

  register struct super_block *sp;
  bit_t bit;

  /* Locate the appropriate super_block and return bit. */
  sp = get_super(dev);
  if (numb < sp->s_firstdatazone || numb >= sp->s_zones) return;
  bit = (bit_t) (numb - (sp->s_firstdatazone - 1));
  free_bit(sp, ZMAP, bit);
  if (bit < sp->s_zsearch) sp->s_zsearch = bit;
}

/*===========================================================================*
 *                              rw_block                                     *
 *===========================================================================*/
PRIVATE int rw_block(bp, rw_flag)
register struct buf *bp;        /* buffer pointer */
int rw_flag;                    /* READING or WRITING */
{
/* Read or write a disk block. This is the only routine in which actual disk
 * I/O is invoked. If an error occurs, a message is printed here, but the error
 * is not reported to the caller.  If the error occurred while purging a block
 * from the cache, it is not clear what the caller could do about it anyway.
 */

  int r, op;
  off_t pos;
  dev_t dev;
  int block_size;

  block_size = get_block_size(bp->b_dev);

  if ( (dev = bp->b_dev) != NO_DEV) {
        pos = (off_t) bp->b_blocknr * block_size;
        op = (rw_flag == READING ? DEV_READ : DEV_WRITE);
        r = dev_io(op, dev, FS_PROC_NR, bp->b_data, pos, block_size, 0);
        if (r != block_size) {
            if (r >= 0) r = END_OF_FILE;
            if (r != END_OF_FILE)
              printf("Unrecoverable disk error on device %d/%d, block %ld\n",
                        (dev>>MAJOR)&BYTE, (dev>>MINOR)&BYTE, bp->b_blocknr);
                bp->b_dev = NO_DEV;     /* invalidate block */

                /* Report read errors to interested parties. */
                if (rw_flag == READING) rdwt_err = r;
        }
  }

  bp->b_dirt = CLEAN;

  return OK;
}

/*===========================================================================*
 *                              invalidate                                   *
 *===========================================================================*/
PUBLIC void invalidate(device)
dev_t device;                   /* device whose blocks are to be purged */
{
/* Remove all the blocks belonging to some device from the cache. */

  register struct buf *bp;

  for (bp = &buf[0]; bp < &buf[NR_BUFS]; bp++)
        if (bp->b_dev == device) bp->b_dev = NO_DEV;

#if ENABLE_CACHE2
  invalidate2(device);
#endif
}

/*===========================================================================*
 *                              flushall                                     *
 *===========================================================================*/
PUBLIC void flushall(dev)
dev_t dev;                      /* device to flush */
{
/* Flush all dirty blocks for one device. */

  register struct buf *bp;
  static struct buf *dirty[NR_BUFS];    /* static so it isn't on stack */
  int ndirty;

  for (bp = &buf[0], ndirty = 0; bp < &buf[NR_BUFS]; bp++)
        if (bp->b_dirt == DIRTY && bp->b_dev == dev) dirty[ndirty++] = bp;
  rw_scattered(dev, dirty, ndirty, WRITING);
}

/*===========================================================================*
 *                              rw_scattered                                 *
 *===========================================================================*/
PUBLIC void rw_scattered(dev, bufq, bufqsize, rw_flag)
dev_t dev;                      /* major-minor device number */
struct buf **bufq;              /* pointer to array of buffers */
int bufqsize;                   /* number of buffers */
int rw_flag;                    /* READING or WRITING */
{
/* Read or write scattered data from a device. */

  register struct buf *bp;
  int gap;
  register int i;
  register iovec_t *iop;
  static iovec_t iovec[NR_IOREQS];  /* static so it isn't on stack */
  int j, r;
  int block_size;

  block_size = get_block_size(dev);

  /* (Shell) sort buffers on b_blocknr. */
  gap = 1;
  do
        gap = 3 * gap + 1;
  while (gap <= bufqsize);
  while (gap != 1) {
        gap /= 3;
        for (j = gap; j < bufqsize; j++) {
                for (i = j - gap;
                     i >= 0 && bufq[i]->b_blocknr > bufq[i + gap]->b_blocknr;
                     i -= gap) {
                        bp = bufq[i];
                        bufq[i] = bufq[i + gap];
                        bufq[i + gap] = bp;
                }
        }
  }

  /* Set up I/O vector and do I/O.  The result of dev_io is OK if everything
   * went fine, otherwise the error code for the first failed transfer.
   */  
  while (bufqsize > 0) {
        for (j = 0, iop = iovec; j < NR_IOREQS && j < bufqsize; j++, iop++) {
                bp = bufq[j];
                if (bp->b_blocknr != bufq[0]->b_blocknr + j) break;
                iop->iov_addr = (vir_bytes) bp->b_data;
                iop->iov_size = block_size;
        }
        r = dev_io(rw_flag == WRITING ? DEV_SCATTER : DEV_GATHER,
                dev, FS_PROC_NR, iovec,
                (off_t) bufq[0]->b_blocknr * block_size, j, 0);

        /* Harvest the results.  Dev_io reports the first error it may have
         * encountered, but we only care if it's the first block that failed.
         */
        for (i = 0, iop = iovec; i < j; i++, iop++) {
                bp = bufq[i];
                if (iop->iov_size != 0) {
                        /* Transfer failed. An error? Do we care? */
                        if (r != OK && i == 0) {
                                printf(
                                "fs: I/O error on device %d/%d, block %lu\n",
                                        (dev>>MAJOR)&BYTE, (dev>>MINOR)&BYTE,
                                        bp->b_blocknr);
                                bp->b_dev = NO_DEV;     /* invalidate block */
                        }
                        break;
                }
                if (rw_flag == READING) {
                        bp->b_dev = dev;        /* validate block */
                        put_block(bp, PARTIAL_DATA_BLOCK);
                } else {
                        bp->b_dirt = CLEAN;
                }
        }
        bufq += i;
        bufqsize -= i;
        if (rw_flag == READING) {
                /* Don't bother reading more than the device is willing to
                 * give at this time.  Don't forget to release those extras.
                 */
                while (bufqsize > 0) {
                        put_block(*bufq++, PARTIAL_DATA_BLOCK);
                        bufqsize--;
                }
        }
        if (rw_flag == WRITING && i == 0) {
                /* We're not making progress, this means we might keep
                 * looping. Buffers remain dirty if un-written. Buffers are
                 * lost if invalidate()d or LRU-removed while dirty. This
                 * is better than keeping unwritable blocks around forever..
                 */
                break;
        }
  }
}

/*===========================================================================*
 *                              rm_lru                                       *
 *===========================================================================*/
PRIVATE void rm_lru(bp)
struct buf *bp;
{
/* Remove a block from its LRU chain. */
  struct buf *next_ptr, *prev_ptr;

  bufs_in_use++;
  next_ptr = bp->b_next;        /* successor on LRU chain */
  prev_ptr = bp->b_prev;        /* predecessor on LRU chain */
  if (prev_ptr != NIL_BUF)
        prev_ptr->b_next = next_ptr;
  else
        front = next_ptr;       /* this block was at front of chain */

  if (next_ptr != NIL_BUF)
        next_ptr->b_prev = prev_ptr;
  else
        rear = prev_ptr;        /* this block was at rear of chain */
}