Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/AssemblyInfo.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/AssemblyInfo.cs (revision 9) +++ (revision ) @@ -1,58 +1,0 @@ -using System.Reflection; -using System.Runtime.CompilerServices; - -// -// General Information about an assembly is controlled through the following -// set of attributes. Change these attribute values to modify the information -// associated with an assembly. -// -[assembly: AssemblyTitle("DotZLib")] -[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")] -[assembly: AssemblyConfiguration("")] -[assembly: AssemblyCompany("Henrik Ravn")] -[assembly: AssemblyProduct("")] -[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")] -[assembly: AssemblyTrademark("")] -[assembly: AssemblyCulture("")] - -// -// Version information for an assembly consists of the following four values: -// -// Major Version -// Minor Version -// Build Number -// Revision -// -// You can specify all the values or you can default the Revision and Build Numbers -// by using the '*' as shown below: - -[assembly: AssemblyVersion("1.0.*")] - -// -// In order to sign your assembly you must specify a key to use. Refer to the -// Microsoft .NET Framework documentation for more information on assembly signing. -// -// Use the attributes below to control which key is used for signing. -// -// Notes: -// (*) If no key is specified, the assembly is not signed. -// (*) KeyName refers to a key that has been installed in the Crypto Service -// Provider (CSP) on your machine. KeyFile refers to a file which contains -// a key. -// (*) If the KeyFile and the KeyName values are both specified, the -// following processing occurs: -// (1) If the KeyName can be found in the CSP, that key is used. -// (2) If the KeyName does not exist and the KeyFile does exist, the key -// in the KeyFile is installed into the CSP and used. -// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility. -// When specifying the KeyFile, the location of the KeyFile should be -// relative to the project output directory which is -// %Project Directory%\obj\. For example, if your KeyFile is -// located in the project directory, you would specify the AssemblyKeyFile -// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] -// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework -// documentation for more information on this. -// -[assembly: AssemblyDelaySign(false)] -[assembly: AssemblyKeyFile("")] -[assembly: AssemblyKeyName("")] Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/ChecksumImpl.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/ChecksumImpl.cs (revision 9) +++ (revision ) @@ -1,202 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Runtime.InteropServices; -using System.Text; - - -namespace DotZLib -{ - #region ChecksumGeneratorBase - /// - /// Implements the common functionality needed for all s - /// - /// - public abstract class ChecksumGeneratorBase : ChecksumGenerator - { - /// - /// The value of the current checksum - /// - protected uint _current; - - /// - /// Initializes a new instance of the checksum generator base - the current checksum is - /// set to zero - /// - public ChecksumGeneratorBase() - { - _current = 0; - } - - /// - /// Initializes a new instance of the checksum generator basewith a specified value - /// - /// The value to set the current checksum to - public ChecksumGeneratorBase(uint initialValue) - { - _current = initialValue; - } - - /// - /// Resets the current checksum to zero - /// - public void Reset() { _current = 0; } - - /// - /// Gets the current checksum value - /// - public uint Value { get { return _current; } } - - /// - /// Updates the current checksum with part of an array of bytes - /// - /// The data to update the checksum with - /// Where in data to start updating - /// The number of bytes from data to use - /// The sum of offset and count is larger than the length of data - /// data is a null reference - /// Offset or count is negative. - /// All the other Update methods are implmeneted in terms of this one. - /// This is therefore the only method a derived class has to implement - public abstract void Update(byte[] data, int offset, int count); - - /// - /// Updates the current checksum with an array of bytes. - /// - /// The data to update the checksum with - public void Update(byte[] data) - { - Update(data, 0, data.Length); - } - - /// - /// Updates the current checksum with the data from a string - /// - /// The string to update the checksum with - /// The characters in the string are converted by the UTF-8 encoding - public void Update(string data) - { - Update(Encoding.UTF8.GetBytes(data)); - } - - /// - /// Updates the current checksum with the data from a string, using a specific encoding - /// - /// The string to update the checksum with - /// The encoding to use - public void Update(string data, Encoding encoding) - { - Update(encoding.GetBytes(data)); - } - - } - #endregion - - #region CRC32 - /// - /// Implements a CRC32 checksum generator - /// - public sealed class CRC32Checksum : ChecksumGeneratorBase - { - #region DLL imports - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern uint crc32(uint crc, int data, uint length); - - #endregion - - /// - /// Initializes a new instance of the CRC32 checksum generator - /// - public CRC32Checksum() : base() {} - - /// - /// Initializes a new instance of the CRC32 checksum generator with a specified value - /// - /// The value to set the current checksum to - public CRC32Checksum(uint initialValue) : base(initialValue) {} - - /// - /// Updates the current checksum with part of an array of bytes - /// - /// The data to update the checksum with - /// Where in data to start updating - /// The number of bytes from data to use - /// The sum of offset and count is larger than the length of data - /// data is a null reference - /// Offset or count is negative. - public override void Update(byte[] data, int offset, int count) - { - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > data.Length) throw new ArgumentException(); - GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); - try - { - _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); - } - finally - { - hData.Free(); - } - } - - } - #endregion - - #region Adler - /// - /// Implements a checksum generator that computes the Adler checksum on data - /// - public sealed class AdlerChecksum : ChecksumGeneratorBase - { - #region DLL imports - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern uint adler32(uint adler, int data, uint length); - - #endregion - - /// - /// Initializes a new instance of the Adler checksum generator - /// - public AdlerChecksum() : base() {} - - /// - /// Initializes a new instance of the Adler checksum generator with a specified value - /// - /// The value to set the current checksum to - public AdlerChecksum(uint initialValue) : base(initialValue) {} - - /// - /// Updates the current checksum with part of an array of bytes - /// - /// The data to update the checksum with - /// Where in data to start updating - /// The number of bytes from data to use - /// The sum of offset and count is larger than the length of data - /// data is a null reference - /// Offset or count is negative. - public override void Update(byte[] data, int offset, int count) - { - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > data.Length) throw new ArgumentException(); - GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); - try - { - _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); - } - finally - { - hData.Free(); - } - } - - } - #endregion - -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/CircularBuffer.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/CircularBuffer.cs (revision 9) +++ (revision ) @@ -1,83 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Diagnostics; - -namespace DotZLib -{ - - /// - /// This class implements a circular buffer - /// - internal class CircularBuffer - { - #region Private data - private int _capacity; - private int _head; - private int _tail; - private int _size; - private byte[] _buffer; - #endregion - - public CircularBuffer(int capacity) - { - Debug.Assert( capacity > 0 ); - _buffer = new byte[capacity]; - _capacity = capacity; - _head = 0; - _tail = 0; - _size = 0; - } - - public int Size { get { return _size; } } - - public int Put(byte[] source, int offset, int count) - { - Debug.Assert( count > 0 ); - int trueCount = Math.Min(count, _capacity - Size); - for (int i = 0; i < trueCount; ++i) - _buffer[(_tail+i) % _capacity] = source[offset+i]; - _tail += trueCount; - _tail %= _capacity; - _size += trueCount; - return trueCount; - } - - public bool Put(byte b) - { - if (Size == _capacity) // no room - return false; - _buffer[_tail++] = b; - _tail %= _capacity; - ++_size; - return true; - } - - public int Get(byte[] destination, int offset, int count) - { - int trueCount = Math.Min(count,Size); - for (int i = 0; i < trueCount; ++i) - destination[offset + i] = _buffer[(_head+i) % _capacity]; - _head += trueCount; - _head %= _capacity; - _size -= trueCount; - return trueCount; - } - - public int Get() - { - if (Size == 0) - return -1; - - int result = (int)_buffer[_head++ % _capacity]; - --_size; - return result; - } - - } -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/CodecBase.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/CodecBase.cs (revision 9) +++ (revision ) @@ -1,198 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Runtime.InteropServices; - -namespace DotZLib -{ - /// - /// Implements the common functionality needed for all s - /// - public abstract class CodecBase : Codec, IDisposable - { - - #region Data members - - /// - /// Instance of the internal zlib buffer structure that is - /// passed to all functions in the zlib dll - /// - internal ZStream _ztream = new ZStream(); - - /// - /// True if the object instance has been disposed, false otherwise - /// - protected bool _isDisposed = false; - - /// - /// The size of the internal buffers - /// - protected const int kBufferSize = 16384; - - private byte[] _outBuffer = new byte[kBufferSize]; - private byte[] _inBuffer = new byte[kBufferSize]; - - private GCHandle _hInput; - private GCHandle _hOutput; - - private uint _checksum = 0; - - #endregion - - /// - /// Initializes a new instance of the CodeBase class. - /// - public CodecBase() - { - try - { - _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned); - _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned); - } - catch (Exception) - { - CleanUp(false); - throw; - } - } - - - #region Codec Members - - /// - /// Occurs when more processed data are available. - /// - public event DataAvailableHandler DataAvailable; - - /// - /// Fires the event - /// - protected void OnDataAvailable() - { - if (_ztream.total_out > 0) - { - if (DataAvailable != null) - DataAvailable( _outBuffer, 0, (int)_ztream.total_out); - resetOutput(); - } - } - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// Adding data may, or may not, raise the DataAvailable event - public void Add(byte[] data) - { - Add(data,0,data.Length); - } - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// The index of the first byte to add from data - /// The number of bytes to add - /// Adding data may, or may not, raise the DataAvailable event - /// This must be implemented by a derived class - public abstract void Add(byte[] data, int offset, int count); - - /// - /// Finishes up any pending data that needs to be processed and handled. - /// - /// This must be implemented by a derived class - public abstract void Finish(); - - /// - /// Gets the checksum of the data that has been added so far - /// - public uint Checksum { get { return _checksum; } } - - #endregion - - #region Destructor & IDisposable stuff - - /// - /// Destroys this instance - /// - ~CodecBase() - { - CleanUp(false); - } - - /// - /// Releases any unmanaged resources and calls the method of the derived class - /// - public void Dispose() - { - CleanUp(true); - } - - /// - /// Performs any codec specific cleanup - /// - /// This must be implemented by a derived class - protected abstract void CleanUp(); - - // performs the release of the handles and calls the dereived CleanUp() - private void CleanUp(bool isDisposing) - { - if (!_isDisposed) - { - CleanUp(); - if (_hInput.IsAllocated) - _hInput.Free(); - if (_hOutput.IsAllocated) - _hOutput.Free(); - - _isDisposed = true; - } - } - - - #endregion - - #region Helper methods - - /// - /// Copies a number of bytes to the internal codec buffer - ready for proccesing - /// - /// The byte array that contains the data to copy - /// The index of the first byte to copy - /// The number of bytes to copy from data - protected void copyInput(byte[] data, int startIndex, int count) - { - Array.Copy(data, startIndex, _inBuffer,0, count); - _ztream.next_in = _hInput.AddrOfPinnedObject(); - _ztream.total_in = 0; - _ztream.avail_in = (uint)count; - - } - - /// - /// Resets the internal output buffers to a known state - ready for processing - /// - protected void resetOutput() - { - _ztream.total_out = 0; - _ztream.avail_out = kBufferSize; - _ztream.next_out = _hOutput.AddrOfPinnedObject(); - } - - /// - /// Updates the running checksum property - /// - /// The new checksum value - protected void setChecksum(uint newSum) - { - _checksum = newSum; - } - #endregion - - } -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/Deflater.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/Deflater.cs (revision 9) +++ (revision ) @@ -1,106 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Diagnostics; -using System.Runtime.InteropServices; - -namespace DotZLib -{ - - /// - /// Implements a data compressor, using the deflate algorithm in the ZLib dll - /// - public sealed class Deflater : CodecBase - { - #region Dll imports - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] - private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int deflate(ref ZStream sz, int flush); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int deflateReset(ref ZStream sz); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int deflateEnd(ref ZStream sz); - #endregion - - /// - /// Constructs an new instance of the Deflater - /// - /// The compression level to use for this Deflater - public Deflater(CompressLevel level) : base() - { - int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream)); - if (retval != 0) - throw new ZLibException(retval, "Could not initialize deflater"); - - resetOutput(); - } - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// The index of the first byte to add from data - /// The number of bytes to add - /// Adding data may, or may not, raise the DataAvailable event - public override void Add(byte[] data, int offset, int count) - { - if (data == null) throw new ArgumentNullException(); - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > data.Length) throw new ArgumentException(); - - int total = count; - int inputIndex = offset; - int err = 0; - - while (err >= 0 && inputIndex < total) - { - copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); - while (err >= 0 && _ztream.avail_in > 0) - { - err = deflate(ref _ztream, (int)FlushTypes.None); - if (err == 0) - while (_ztream.avail_out == 0) - { - OnDataAvailable(); - err = deflate(ref _ztream, (int)FlushTypes.None); - } - inputIndex += (int)_ztream.total_in; - } - } - setChecksum( _ztream.adler ); - } - - - /// - /// Finishes up any pending data that needs to be processed and handled. - /// - public override void Finish() - { - int err; - do - { - err = deflate(ref _ztream, (int)FlushTypes.Finish); - OnDataAvailable(); - } - while (err == 0); - setChecksum( _ztream.adler ); - deflateReset(ref _ztream); - resetOutput(); - } - - /// - /// Closes the internal zlib deflate stream - /// - protected override void CleanUp() { deflateEnd(ref _ztream); } - - } -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/DotZLib.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/DotZLib.cs (revision 9) +++ (revision ) @@ -1,288 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.IO; -using System.Runtime.InteropServices; -using System.Text; - - -namespace DotZLib -{ - - #region Internal types - - /// - /// Defines constants for the various flush types used with zlib - /// - internal enum FlushTypes - { - None, Partial, Sync, Full, Finish, Block - } - - #region ZStream structure - // internal mapping of the zlib zstream structure for marshalling - [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)] - internal struct ZStream - { - public IntPtr next_in; - public uint avail_in; - public uint total_in; - - public IntPtr next_out; - public uint avail_out; - public uint total_out; - - [MarshalAs(UnmanagedType.LPStr)] - string msg; - uint state; - - uint zalloc; - uint zfree; - uint opaque; - - int data_type; - public uint adler; - uint reserved; - } - - #endregion - - #endregion - - #region Public enums - /// - /// Defines constants for the available compression levels in zlib - /// - public enum CompressLevel : int - { - /// - /// The default compression level with a reasonable compromise between compression and speed - /// - Default = -1, - /// - /// No compression at all. The data are passed straight through. - /// - None = 0, - /// - /// The maximum compression rate available. - /// - Best = 9, - /// - /// The fastest available compression level. - /// - Fastest = 1 - } - #endregion - - #region Exception classes - /// - /// The exception that is thrown when an error occurs on the zlib dll - /// - public class ZLibException : ApplicationException - { - /// - /// Initializes a new instance of the class with a specified - /// error message and error code - /// - /// The zlib error code that caused the exception - /// A message that (hopefully) describes the error - public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg)) - { - } - - /// - /// Initializes a new instance of the class with a specified - /// error code - /// - /// The zlib error code that caused the exception - public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode)) - { - } - } - #endregion - - #region Interfaces - - /// - /// Declares methods and properties that enables a running checksum to be calculated - /// - public interface ChecksumGenerator - { - /// - /// Gets the current value of the checksum - /// - uint Value { get; } - - /// - /// Clears the current checksum to 0 - /// - void Reset(); - - /// - /// Updates the current checksum with an array of bytes - /// - /// The data to update the checksum with - void Update(byte[] data); - - /// - /// Updates the current checksum with part of an array of bytes - /// - /// The data to update the checksum with - /// Where in data to start updating - /// The number of bytes from data to use - /// The sum of offset and count is larger than the length of data - /// data is a null reference - /// Offset or count is negative. - void Update(byte[] data, int offset, int count); - - /// - /// Updates the current checksum with the data from a string - /// - /// The string to update the checksum with - /// The characters in the string are converted by the UTF-8 encoding - void Update(string data); - - /// - /// Updates the current checksum with the data from a string, using a specific encoding - /// - /// The string to update the checksum with - /// The encoding to use - void Update(string data, Encoding encoding); - } - - - /// - /// Represents the method that will be called from a codec when new data - /// are available. - /// - /// The byte array containing the processed data - /// The index of the first processed byte in data - /// The number of processed bytes available - /// On return from this method, the data may be overwritten, so grab it while you can. - /// You cannot assume that startIndex will be zero. - /// - public delegate void DataAvailableHandler(byte[] data, int startIndex, int count); - - /// - /// Declares methods and events for implementing compressors/decompressors - /// - public interface Codec - { - /// - /// Occurs when more processed data are available. - /// - event DataAvailableHandler DataAvailable; - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// Adding data may, or may not, raise the DataAvailable event - void Add(byte[] data); - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// The index of the first byte to add from data - /// The number of bytes to add - /// Adding data may, or may not, raise the DataAvailable event - void Add(byte[] data, int offset, int count); - - /// - /// Finishes up any pending data that needs to be processed and handled. - /// - void Finish(); - - /// - /// Gets the checksum of the data that has been added so far - /// - uint Checksum { get; } - - - } - - #endregion - - #region Classes - /// - /// Encapsulates general information about the ZLib library - /// - public class Info - { - #region DLL imports - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern uint zlibCompileFlags(); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern string zlibVersion(); - #endregion - - #region Private stuff - private uint _flags; - - // helper function that unpacks a bitsize mask - private static int bitSize(uint bits) - { - switch (bits) - { - case 0: return 16; - case 1: return 32; - case 2: return 64; - } - return -1; - } - #endregion - - /// - /// Constructs an instance of the Info class. - /// - public Info() - { - _flags = zlibCompileFlags(); - } - - /// - /// True if the library is compiled with debug info - /// - public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } } - - /// - /// True if the library is compiled with assembly optimizations - /// - public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } } - - /// - /// Gets the size of the unsigned int that was compiled into Zlib - /// - public int SizeOfUInt { get { return bitSize(_flags & 3); } } - - /// - /// Gets the size of the unsigned long that was compiled into Zlib - /// - public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } } - - /// - /// Gets the size of the pointers that were compiled into Zlib - /// - public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } } - - /// - /// Gets the size of the z_off_t type that was compiled into Zlib - /// - public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } } - - /// - /// Gets the version of ZLib as a string, e.g. "1.2.1" - /// - public static string Version { get { return zlibVersion(); } } - } - - #endregion - -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/DotZLib.csproj =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/DotZLib.csproj (revision 9) +++ (revision ) @@ -1,141 +1,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/GZipStream.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/GZipStream.cs (revision 9) +++ (revision ) @@ -1,301 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.IO; -using System.Runtime.InteropServices; - -namespace DotZLib -{ - /// - /// Implements a compressed , in GZip (.gz) format. - /// - public class GZipStream : Stream, IDisposable - { - #region Dll Imports - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] - private static extern IntPtr gzopen(string name, string mode); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int gzclose(IntPtr gzFile); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int gzwrite(IntPtr gzFile, int data, int length); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int gzread(IntPtr gzFile, int data, int length); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int gzgetc(IntPtr gzFile); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int gzputc(IntPtr gzFile, int c); - - #endregion - - #region Private data - private IntPtr _gzFile; - private bool _isDisposed = false; - private bool _isWriting; - #endregion - - #region Constructors - /// - /// Creates a new file as a writeable GZipStream - /// - /// The name of the compressed file to create - /// The compression level to use when adding data - /// If an error occurred in the internal zlib function - public GZipStream(string fileName, CompressLevel level) - { - _isWriting = true; - _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level)); - if (_gzFile == IntPtr.Zero) - throw new ZLibException(-1, "Could not open " + fileName); - } - - /// - /// Opens an existing file as a readable GZipStream - /// - /// The name of the file to open - /// If an error occurred in the internal zlib function - public GZipStream(string fileName) - { - _isWriting = false; - _gzFile = gzopen(fileName, "rb"); - if (_gzFile == IntPtr.Zero) - throw new ZLibException(-1, "Could not open " + fileName); - - } - #endregion - - #region Access properties - /// - /// Returns true of this stream can be read from, false otherwise - /// - public override bool CanRead - { - get - { - return !_isWriting; - } - } - - - /// - /// Returns false. - /// - public override bool CanSeek - { - get - { - return false; - } - } - - /// - /// Returns true if this tsream is writeable, false otherwise - /// - public override bool CanWrite - { - get - { - return _isWriting; - } - } - #endregion - - #region Destructor & IDispose stuff - - /// - /// Destroys this instance - /// - ~GZipStream() - { - cleanUp(false); - } - - /// - /// Closes the external file handle - /// - public void Dispose() - { - cleanUp(true); - } - - // Does the actual closing of the file handle. - private void cleanUp(bool isDisposing) - { - if (!_isDisposed) - { - gzclose(_gzFile); - _isDisposed = true; - } - } - #endregion - - #region Basic reading and writing - /// - /// Attempts to read a number of bytes from the stream. - /// - /// The destination data buffer - /// The index of the first destination byte in buffer - /// The number of bytes requested - /// The number of bytes read - /// If buffer is null - /// If count or offset are negative - /// If offset + count is > buffer.Length - /// If this stream is not readable. - /// If this stream has been disposed. - public override int Read(byte[] buffer, int offset, int count) - { - if (!CanRead) throw new NotSupportedException(); - if (buffer == null) throw new ArgumentNullException(); - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > buffer.Length) throw new ArgumentException(); - if (_isDisposed) throw new ObjectDisposedException("GZipStream"); - - GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); - int result; - try - { - result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); - if (result < 0) - throw new IOException(); - } - finally - { - h.Free(); - } - return result; - } - - /// - /// Attempts to read a single byte from the stream. - /// - /// The byte that was read, or -1 in case of error or End-Of-File - public override int ReadByte() - { - if (!CanRead) throw new NotSupportedException(); - if (_isDisposed) throw new ObjectDisposedException("GZipStream"); - return gzgetc(_gzFile); - } - - /// - /// Writes a number of bytes to the stream - /// - /// - /// - /// - /// If buffer is null - /// If count or offset are negative - /// If offset + count is > buffer.Length - /// If this stream is not writeable. - /// If this stream has been disposed. - public override void Write(byte[] buffer, int offset, int count) - { - if (!CanWrite) throw new NotSupportedException(); - if (buffer == null) throw new ArgumentNullException(); - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > buffer.Length) throw new ArgumentException(); - if (_isDisposed) throw new ObjectDisposedException("GZipStream"); - - GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); - try - { - int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); - if (result < 0) - throw new IOException(); - } - finally - { - h.Free(); - } - } - - /// - /// Writes a single byte to the stream - /// - /// The byte to add to the stream. - /// If this stream is not writeable. - /// If this stream has been disposed. - public override void WriteByte(byte value) - { - if (!CanWrite) throw new NotSupportedException(); - if (_isDisposed) throw new ObjectDisposedException("GZipStream"); - - int result = gzputc(_gzFile, (int)value); - if (result < 0) - throw new IOException(); - } - #endregion - - #region Position & length stuff - /// - /// Not supported. - /// - /// - /// Always thrown - public override void SetLength(long value) - { - throw new NotSupportedException(); - } - - /// - /// Not suppported. - /// - /// - /// - /// - /// Always thrown - public override long Seek(long offset, SeekOrigin origin) - { - throw new NotSupportedException(); - } - - /// - /// Flushes the GZipStream. - /// - /// In this implementation, this method does nothing. This is because excessive - /// flushing may degrade the achievable compression rates. - public override void Flush() - { - // left empty on purpose - } - - /// - /// Gets/sets the current position in the GZipStream. Not suppported. - /// - /// In this implementation this property is not supported - /// Always thrown - public override long Position - { - get - { - throw new NotSupportedException(); - } - set - { - throw new NotSupportedException(); - } - } - - /// - /// Gets the size of the stream. Not suppported. - /// - /// In this implementation this property is not supported - /// Always thrown - public override long Length - { - get - { - throw new NotSupportedException(); - } - } - #endregion - } -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/Inflater.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/Inflater.cs (revision 9) +++ (revision ) @@ -1,105 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Diagnostics; -using System.Runtime.InteropServices; - -namespace DotZLib -{ - - /// - /// Implements a data decompressor, using the inflate algorithm in the ZLib dll - /// - public class Inflater : CodecBase - { - #region Dll imports - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] - private static extern int inflateInit_(ref ZStream sz, string vs, int size); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int inflate(ref ZStream sz, int flush); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int inflateReset(ref ZStream sz); - - [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] - private static extern int inflateEnd(ref ZStream sz); - #endregion - - /// - /// Constructs an new instance of the Inflater - /// - public Inflater() : base() - { - int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream)); - if (retval != 0) - throw new ZLibException(retval, "Could not initialize inflater"); - - resetOutput(); - } - - - /// - /// Adds more data to the codec to be processed. - /// - /// Byte array containing the data to be added to the codec - /// The index of the first byte to add from data - /// The number of bytes to add - /// Adding data may, or may not, raise the DataAvailable event - public override void Add(byte[] data, int offset, int count) - { - if (data == null) throw new ArgumentNullException(); - if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); - if ((offset+count) > data.Length) throw new ArgumentException(); - - int total = count; - int inputIndex = offset; - int err = 0; - - while (err >= 0 && inputIndex < total) - { - copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); - err = inflate(ref _ztream, (int)FlushTypes.None); - if (err == 0) - while (_ztream.avail_out == 0) - { - OnDataAvailable(); - err = inflate(ref _ztream, (int)FlushTypes.None); - } - - inputIndex += (int)_ztream.total_in; - } - setChecksum( _ztream.adler ); - } - - - /// - /// Finishes up any pending data that needs to be processed and handled. - /// - public override void Finish() - { - int err; - do - { - err = inflate(ref _ztream, (int)FlushTypes.Finish); - OnDataAvailable(); - } - while (err == 0); - setChecksum( _ztream.adler ); - inflateReset(ref _ztream); - resetOutput(); - } - - /// - /// Closes the internal zlib inflate stream - /// - protected override void CleanUp() { inflateEnd(ref _ztream); } - - - } -} Index: trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/UnitTests.cs =================================================================== --- trunk/minix/lib/zlib-1.2.3/contrib/dotzlib/DotZLib/UnitTests.cs (revision 9) +++ (revision ) @@ -1,274 +1,0 @@ -// -// © Copyright Henrik Ravn 2004 -// -// Use, modification and distribution are subject to the Boost Software License, Version 1.0. -// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) -// - -using System; -using System.Collections; -using System.IO; - -// uncomment the define below to include unit tests -//#define nunit -#if nunit -using NUnit.Framework; - -// Unit tests for the DotZLib class library -// ---------------------------------------- -// -// Use this with NUnit 2 from http://www.nunit.org -// - -namespace DotZLibTests -{ - using DotZLib; - - // helper methods - internal class Utils - { - public static bool byteArrEqual( byte[] lhs, byte[] rhs ) - { - if (lhs.Length != rhs.Length) - return false; - for (int i = lhs.Length-1; i >= 0; --i) - if (lhs[i] != rhs[i]) - return false; - return true; - } - - } - - - [TestFixture] - public class CircBufferTests - { - #region Circular buffer tests - [Test] - public void SinglePutGet() - { - CircularBuffer buf = new CircularBuffer(10); - Assert.AreEqual( 0, buf.Size ); - Assert.AreEqual( -1, buf.Get() ); - - Assert.IsTrue(buf.Put( 1 )); - Assert.AreEqual( 1, buf.Size ); - Assert.AreEqual( 1, buf.Get() ); - Assert.AreEqual( 0, buf.Size ); - Assert.AreEqual( -1, buf.Get() ); - } - - [Test] - public void BlockPutGet() - { - CircularBuffer buf = new CircularBuffer(10); - byte[] arr = {1,2,3,4,5,6,7,8,9,10}; - Assert.AreEqual( 10, buf.Put(arr,0,10) ); - Assert.AreEqual( 10, buf.Size ); - Assert.IsFalse( buf.Put(11) ); - Assert.AreEqual( 1, buf.Get() ); - Assert.IsTrue( buf.Put(11) ); - - byte[] arr2 = (byte[])arr.Clone(); - Assert.AreEqual( 9, buf.Get(arr2,1,9) ); - Assert.IsTrue( Utils.byteArrEqual(arr,arr2) ); - } - - #endregion - } - - [TestFixture] - public class ChecksumTests - { - #region CRC32 Tests - [Test] - public void CRC32_Null() - { - CRC32Checksum crc32 = new CRC32Checksum(); - Assert.AreEqual( 0, crc32.Value ); - - crc32 = new CRC32Checksum(1); - Assert.AreEqual( 1, crc32.Value ); - - crc32 = new CRC32Checksum(556); - Assert.AreEqual( 556, crc32.Value ); - } - - [Test] - public void CRC32_Data() - { - CRC32Checksum crc32 = new CRC32Checksum(); - byte[] data = { 1,2,3,4,5,6,7 }; - crc32.Update(data); - Assert.AreEqual( 0x70e46888, crc32.Value ); - - crc32 = new CRC32Checksum(); - crc32.Update("penguin"); - Assert.AreEqual( 0x0e5c1a120, crc32.Value ); - - crc32 = new CRC32Checksum(1); - crc32.Update("penguin"); - Assert.AreEqual(0x43b6aa94, crc32.Value); - - } - #endregion - - #region Adler tests - - [Test] - public void Adler_Null() - { - AdlerChecksum adler = new AdlerChecksum(); - Assert.AreEqual(0, adler.Value); - - adler = new AdlerChecksum(1); - Assert.AreEqual( 1, adler.Value ); - - adler = new AdlerChecksum(556); - Assert.AreEqual( 556, adler.Value ); - } - - [Test] - public void Adler_Data() - { - AdlerChecksum adler = new AdlerChecksum(1); - byte[] data = { 1,2,3,4,5,6,7 }; - adler.Update(data); - Assert.AreEqual( 0x5b001d, adler.Value ); - - adler = new AdlerChecksum(); - adler.Update("penguin"); - Assert.AreEqual(0x0bcf02f6, adler.Value ); - - adler = new AdlerChecksum(1); - adler.Update("penguin"); - Assert.AreEqual(0x0bd602f7, adler.Value); - - } - #endregion - } - - [TestFixture] - public class InfoTests - { - #region Info tests - [Test] - public void Info_Version() - { - Info info = new Info(); - Assert.AreEqual("1.2.3", Info.Version); - Assert.AreEqual(32, info.SizeOfUInt); - Assert.AreEqual(32, info.SizeOfULong); - Assert.AreEqual(32, info.SizeOfPointer); - Assert.AreEqual(32, info.SizeOfOffset); - } - #endregion - } - - [TestFixture] - public class DeflateInflateTests - { - #region Deflate tests - [Test] - public void Deflate_Init() - { - using (Deflater def = new Deflater(CompressLevel.Default)) - { - } - } - - private ArrayList compressedData = new ArrayList(); - private uint adler1; - - private ArrayList uncompressedData = new ArrayList(); - private uint adler2; - - public void CDataAvail(byte[] data, int startIndex, int count) - { - for (int i = 0; i < count; ++i) - compressedData.Add(data[i+startIndex]); - } - - [Test] - public void Deflate_Compress() - { - compressedData.Clear(); - - byte[] testData = new byte[35000]; - for (int i = 0; i < testData.Length; ++i) - testData[i] = 5; - - using (Deflater def = new Deflater((CompressLevel)5)) - { - def.DataAvailable += new DataAvailableHandler(CDataAvail); - def.Add(testData); - def.Finish(); - adler1 = def.Checksum; - } - } - #endregion - - #region Inflate tests - [Test] - public void Inflate_Init() - { - using (Inflater inf = new Inflater()) - { - } - } - - private void DDataAvail(byte[] data, int startIndex, int count) - { - for (int i = 0; i < count; ++i) - uncompressedData.Add(data[i+startIndex]); - } - - [Test] - public void Inflate_Expand() - { - uncompressedData.Clear(); - - using (Inflater inf = new Inflater()) - { - inf.DataAvailable += new DataAvailableHandler(DDataAvail); - inf.Add((byte[])compressedData.ToArray(typeof(byte))); - inf.Finish(); - adler2 = inf.Checksum; - } - Assert.AreEqual( adler1, adler2 ); - } - #endregion - } - - [TestFixture] - public class GZipStreamTests - { - #region GZipStream test - [Test] - public void GZipStream_WriteRead() - { - using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best)) - { - BinaryWriter writer = new BinaryWriter(gzOut); - writer.Write("hi there"); - writer.Write(Math.PI); - writer.Write(42); - } - - using (GZipStream gzIn = new GZipStream("gzstream.gz")) - { - BinaryReader reader = new BinaryReader(gzIn); - string s = reader.ReadString(); - Assert.AreEqual("hi there",s); - double d = reader.ReadDouble(); - Assert.AreEqual(Math.PI, d); - int i = reader.ReadInt32(); - Assert.AreEqual(42,i); - } - - } - #endregion - } -} - -#endif